RUTX08 FCC

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTX08 > RUTX08 Certification & Approvals > RUTX08 FCC

The FCC Declaration of Conformity or the FCC label or the FCC mark is a certification mark employed on electronic products manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission.

Description

The FCC label is found even on products sold outside the US territory, because they are either products manufactured in the US and had been exported, or they are also sold in the US. This makes the FCC label recognizable worldwide even to people to whom the name of the agency Federal Communications Commission is not familiar

The Federal Communications Commission established the regulations on electromagnetic interference under Part 15 of the FCC rules in 1975. After several amendments over the years, these regulation were reconstituted as the Declaration of Conformity and Certification procedures in 1998.

FCC Approval Procedure

As specified in official FCC website, there are three main ways of authorizing the equipment:

  • Certification process
  • Suppliers Declaration of Conformity
  • Both procedures

RUTX08 FCC Conformity Procedure

For RUTX08, compliance with the FCC's Supplier’s Declaration of Conformity (SDoC) procedure is mandatory. This procedure requires the party responsible for compliance to ensure that the equipment meets the applicable technical standards. The responsible party—who must be located in the United States—is not required to file an equipment authorization application with the FCC or a Telecommunication Certification Body (TCB). Equipment authorized under the SDoC procedure is not listed in the FCC’s database. However, the responsible party, or any other party marketing the equipment, must provide a test report and other documentation demonstrating compliance upon request by the Commission. Alternatively, the responsible party may choose to follow the certification procedure instead of the SDoC.

Official Federal Communications Commission for SDoC compliance requires and mandates two major parties:

  • Manufacturer (UAB Teltonika Networks) – to test the device for all applicable standards;
  • Local US entity (Importer or Marketer) – to sign Supplier's Declaration of Conformity.

RUTX08 conformity with the essential requirements has been demonstrated against the following harmonized standards:

FCC Standard Test Report No.
47 CFR Part 15, Subpart B SZCR250100016601

RUTX08 FCC Supplier's Declaration of Conformity

We, UAB Teltonika Networks, have fulfilled our duty of testing the device for all the required standards by FCC.

Only Importer or Marketer, local US entity, can sign Supplier's Declaration of Conformity, therefore please find SDoC below and sign by your own entity's name.

RUTX08 Suppliers Declaration of Conformity, page 1
RUTX08 Suppliers Declaration of Conformity, page 2

To download a PDF version of the declaration, click here. WORD version of the declaration, click here.

External links


Disclaimer:

Test reports that are referenced in declarations and certificates can be provided upon request. For the request to be approved, the recipient of the test reports should be a certification authority or certified test house. The recipients will be asked to sign a non-disclosure agreement (NDA).