RUTX08 Profiles

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX08 > RUTX08 Manual > RUTX08 WebUI > RUTX08 Profiles

Summary[edit | edit source]

Configuration profiles provide a way to create multiple distinct router configuration sets and apply them to the router based on current user requirements. This chapter is an overview of the Profiles page in RUTX08 routers.

The information in this page is updated in accordance with the RUTX_R_00.02.01.1 firmware version.

Profiles[edit | edit source]

This section displays user defined configuration profiles:

Networking rutx manual profiles configuration profiles v1.png

To create a new profile, configure the router in accordance with your needs, go to this page, enter a custom name for the profile and click the 'Add' button. A new profile with the given name will appear in the "configuration profiles" list:

Networking rutx manual profiles configuration profiles add new v1.png

The 'Apply' button applies the adjacent configuration on the router.

Scheduler[edit | edit source]

The Profile Scheduler provides a possibility to set up a schedule of when the router should use one configuration or another. Different configuration profiles use differently colored dots for distinction. Select a profile from the dropdown below and click on time interval boxes in the scheduler table to indicate on which days/hours the profile should be applied.

Networking rutx manual profiles scheduler v1.png

If you plan on using the Scheduler, don't forget to enable it in the General settings section:

Networking rutx manual profiles scheduler general settings v1.png