RUTX09 Auto Reboot

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Auto Reboot

Summary[edit | edit source]

Various automatic router reboot scenarios can be configured in the Auto Reboot section. Automatic reboots can be used as a prophylactic or precautionary measure that ensures the device will self-correct some unexpected issues, especially related to connection downtime. This chapter is an overview of the Auto Reboot section of RUTX09 routers.

The information in this page is updated in accordance with the RUTX_R_00.01.04.5 firmware version.

Ping Reboot[edit | edit source]

The Ping Reboot function periodically sends ICMP or Wget requests to a specified IP address or host and waits for a response. If no response is received, the device will attempt the same action a defined number of times at a defined frequency. If there is still no response, the device will execute the specified action (reboot, by default).

The Ping Reboot section contains one preconfigured rule by default:

Networking rutx manual auto reboot ping reboot v1.png

To enable the default rule, use the off/on slider next to it. You can add more rules with the 'Add' button or delete them using the "Delete" button. If you wish to customize a rule, click the button that looks like a pencil next to it. Refer to the figure and table below for information Ping Reboot configuration.

Networking rutx09 rutx11 manual auto reboot ping reboot configuration v1.png

Field Value Description
Enable off | on; default: off Turns the rule on or off.
No action on data limit off | on; default: off Prevents the rule from performing actions when mobile data limit is reached.
Action if no echo is received Reboot | None; default: Reboot Action that will be executed if there is no response after the specified amount of retries.
Type Ping | Wget; default: Ping Method used for health checking.
  • Ping - sends ICMP requests to the specified host.
  • Wget - retrieves the contents of the specified web server.
Interval between pings 5 mins | 15 mins | 30 mins | 1 hour | 2 hours; default: 5 mins The frequency at which ping/Wget requests are sent to the specified host.
Ping timeout (sec) integer [1..9999]; default: 5 Maximum response time. If no echo is received after the amount of time specified in this field has passed, the ping/wget request is considered to have failed.
Packet size integer [0..1000]; default: 56 ICMP packet size in bytes.
Retry count integer [1..9999]; default: 2 Indicates how many additional times the device will try sending requests if the initial one fails.
Interface Ping from mobile | Automatically selected; default: Automatically selected Interface that will send the ping/Wget requests.
Host to ping host | ip; default: Hostname or IP address to which the ping/Wget requests will be sent.

Periodic Reboot[edit | edit source]

Periodic Reboot is a function that reboots the router at a specified time interval regardless of other circumstances. It can be used as a prophylactic measure, for example, to reboot the router once at the end of every day. Reboot time is chosen by selecting time interval boxes in the scheduler table to indicate on which days/hours reboot will occur.

The figure below is an example of the Periodic Reboot configuration page and the table below provides information on the fields contained in that page:

Networking rutx manual auto reboot periodic reboot v1.png

Field Value Description
Enable off | on; default: off Turns Periodic Reboot on or off.