RUTX09 Firmware Downloads

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX09 > RUTX09 Firmware Downloads

This page contains various firmware versions for RUTX devices.

Firmware Version Changelog
Latest FW* RUTX_R_00.02.01.1 2020.01.15
Factory FW** RUTX_R_00.02.00.2 2019.10.11
Bootloader*** - -

* Latest FW - firmware candidate for release. This version will usually contain some new features and/or improvements (described in the Change log section of this article) but it hasn't been fully tested and approved by Teltonika's testing and technical support units. If Latest is the same version as Factory - it just means that no newer firmware than a Factory version is publicly avaliable.

** Factory FW - firmware used in mass production.

*** Bootloader - a program that loads the operating system or some other system software for the router after completion of the power-on self-tests; it is the loader for the operating system itself. You can find detailed instructions on how to upgrade your Bootloader to a newer version here.

FW checksums


A list of firmware checksums for RUTX firmwares uploaded in this page: checksum list

Change Log


RUTX_R_00.02.01.1 | 2020.01.15

  • New features:
    • Email to SMS
    • Static IP lease
    • SMS OTP and MAC auth in Hotspot
    • Hotspot logs
    • TOS in HotSpot
    • Custom URL parameters while using external landing page in Hotspot
    • Expiration time for Hotspot
    • Wireless status page
    • USB mount settings
    • Site blocking list from file
    • Events Reporting via Email
    • STunnel
    • Multi-User support
    • Mobile page
    • Operators control
    • Bluetooth passive device scanning
    • Hotspot 2.0
    • Modbus MQTT gateway
    • Package manager
    • RUT FOTA
    • TR-069
  • Improvements:
    • Deleted OpenVPN forward rule on instance deletion
    • Improved "SMS Forwarding to Email" field validations
    • Rename IPsec fields from right/left to remote/local
    • Bluetooth style improvements
    • Applied same style on all scheduler templates
    • Renamed "Setup Wizard" steps
    • Renamed "IPv4 and IPv6 routes" headings
    • Renamed "User groups" to "Users & Recipients"
    • Added "Clear data limit" on a specific date
    • Enable/Disable all SMS-Utilities rules at once
  • Fixes:
    • Fixed WAN mobile interfaces reload
    • Fixed parsing interface IP address in WAN
    • Fixed OSPF "Hello Interval" field hint
    • Fixed field validation on "Port Forward" create form
    • Fixed display build date
    • Removed "Bring up on boot" option
    • Fixed Mobile page with additional USB modem
    • Fixed creating SNAT rule without port
    • Fixed SDK archive name

RUTX_R_00.02.00.2 | 2019.10.11

  • Fixes:
    • WiFi fix

RUTX_R_00.02.00.1 | 2019.09.27

  • New features:
    • Auto APN
    • MQTT
    • Web Filter
    • Dynamic Routes
    • GRE over IPsec
    • Wireless Hotspot
    • VRRP
    • HTTP POST/GET
    • Network Shares
    • VLAN multiple tags functionality
    • SMS HTTP POST/GET
    • SMS Forwarding
    • Auto Reply
    • SMS storage
    • Switch back to primary SIM
    • Email groups
    • Default VPN firewall zones
    • Support for XT25F128B spi-nor memory
    • Support for Bluetooth
  • Improvements:
    • Updated Kernel to version 4.14.131
    • Updated Strongswan to version 5.8.0
    • Updated curl to version 7.60.0.4 (fixes CVE-2018-14618, CVE-2018-16839, CVE-2018-16840, CVE-2018-16842, CVE-2019-3823, CVE-2019-3822, CVE-2018-16890)
    • Updated mosquitto to version 1.5.8
    • Updated dnsmasq to version 2.80
    • Updated iptables to version 1.6.2
    • Updated openssl to version 1.0.2s
    • Updated zlib to version 1.2.11
    • Updated hostapd to the 2018-05-21 version (fixes CVE-2019-9494, CVE-2019-9495, CVE-2019-9496, CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, CVE-2019-11555)
    • Updated fstools to the 2019-03-28 version
    • Updated procd to the 2018-03-28 version
    • Updated rpcd to the 2018-11-28 version
    • Updated ubox to the 2018-02-14 version
    • Updated ubus to the 2018-10-06 version
    • Updated uci to the 2019-05-17 version
    • Updated Firewall to the 2018-08-13 version
    • Updated netifd to the 2019-01-31 version
    • Updated uhttpd to the 2018-11-28 version
    • Switched to mac80211 WiFi driver
    • Updated IPsec page
    • Updated DMVPN page
    • Updated Overview configuration page
  • Fixes:
    • Fixed operator name parsing
    • Fixed serial reading
    • Fixed SIM card PIN code setting
    • Fixed I/O event handling
    • Fixed backup save after device restart
    • GPS init script fixes
    • IPsec page rework
    • Failover/Load Balancing mobile interface fixes
    • L2TP/PPTP/SSTP configuration fixes
    • TX power save setting fixes
    • Refactored profiles functionality
    • Added write to config option in Call Utilities
    • Wireless config migration fix
    • Firmware checksum fix

RUTX_R_00.01.06 | 2019.07.24

  • New features:
    • Added Wake on LAN feature
    • Added SSTP VPN support
    • Added mobile bridge feature
    • Added Status → Network page
    • Added SIM Switch feature
    • Added SMS Limit feature
    • Added save and restore SIM PIN code from flash
    • Added feature to monitor switch port events
    • Added Events Reporting send to RMS functionality
    • Added FOTA support for RUTX08, RUTX10, RUTX11
    • Added Modbus TCP master function
  • Improvements
    • Added microcontroller version information
    • Updated Wireless page design and WiFi widget in overview page
    • Updated Overview widget style
    • Updated stm32 firmware
    • Updated LED logic
    • Changed check for new FW logic
    • WebUI style updates
  • Fixes:
    • Fixed multiwan function. Changed firewall traffic control to routing rules control
    • NTP time zone display fix
    • LED functionality fix
    • Changed time function used for rollback timestamps
    • Login form updated and other fixes
    • Fixed firmware update checksum mismatch
    • lua error on map when GPS is disabled fix
    • Firmware update percentage and check box fix
    • LAN interface creation with short names fix
    • WAN state and IP print fixes
    • OpenVPN new port save in firewall rule fix
    • RUT FOTA bug fixes

RUTX_R_00.01.04.5 | 2019.06.14

  • Improvements:
    • Revert settings logic updated
  • Fix:
    • Firmware update checksum mismatch fix
    • DHCP dnsmasq fix
    • Wireless improvements and bug fixes
    • Increased RMS HTTP Proxy resource limit

RUTX_R_00.01.04.1 | 2019.05.17

  • New features:
    • Add initial wireless support
    • Added SNMP support
    • Added Advanced Routing functionality
    • Added L2TP VPN
    • Added PPTP VPN
  • Improvements:
    • Added signal strength logging and reporting to Events Log
    • Added authentic firmware check
    • OpenSSL updated to version 1.0.2r
  • Fixes:
    • Wireless improvements and bug fixes
    • Fixed IPSec Phase 1 and Phase 2 keys lifetime not saving bug
    • Input Output improvements and bug fixes
    • Fixed router values sent from SMS utilities
    • WebUI style fixes
    • Fixed RMS proxy multiform submits

RUTX_R_00.01.03 | 2019.04.25

  • New features:
    • Adapted WebUI for RUTX08
    • Added DMVPN support
    • Added HTTP support
    • Added SMS message input field validation and counter
    • Added UPnP support
    • Added GRE Tunnel support
    • Implemented dynamic routing with BGP, OSPF, RIP, EIGRP and NHRP protocols
    • Added manual network band lock support
    • Added Events Log
    • Added Events Reporting
  • Improvements
    • Updated OpenVPN client count to 20
    • WebUI style updates
  • Fixes:
    • Profile scheduler fixes
    • Mobile service crash fix
    • Ping Reboot IP field validation fix
    • LED functionality related fixes


RUTX_R_00.01.02 | 2019.03.19

  • New features:
    • Added configuration profiles
    • Updated WebUI style
    • Added Reboot button
  • Improvements:
    • curl updated to version 7.64.0
    • openssl updated to version 1.0.2q
    • dropbear updated to version 2018.76
    • busybox updated to version 1.28.3
    • ustream-ssl updated to latest version
    • OpenVPN updated to version 2.4.6
    • OpenVPN-Easy-RSA updated to version 3.0.4
    • ubus updated to version 2018-10-06
    • uhttpd updated to version 2018-11-28
    • NTP updated to version 4.2.8p12
  • Fixes:
    • Root CA validation and page style fixes
    • Hardware compatibility check fix
    • DDNS force IP renew fix
    • Site Blocking enable column fix
    • Don't show rules in Load Balancing mode when in failover page fix

RUTX_R_00.01.01 | 2019.02.05

  • New features:
    • Initial firmware release