RUTX10 Wireless (Status)

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTX10 > RUTX10 Manual > RUTX10 WebUI > RUTX10 Status section > RUTX10 Wireless (Status)

The information in this page is updated in accordance with firmware version RUTX_R_00.07.08.


The Wireless page contains graphs that display various wireless data changes in real time.

This chapter of the user manual provides an overview of the wireless page for RUTX10 devices.


The Interfaces page displays information about all wireless interfaces and clients connected to device.

Wireless interfaces

The Wireless interfaces section contains widgets that display the status of wireless interfaces of the device. The figure below is an example of the widget:

Networking rutos manual wireless interfaces 5.png

Wireless clients

The Wireless clients section shows various information about all active wireless sessions.

Networking rutos manual wireless client.png

Channel analysis

The Channel analysis section displays the status of all available wireless networks at this moment.

Channel Interference

The Channel Interference section shows interactive diagram of channels interference radio bands that displays real-time allocation of channels in the environment.

Networking rutos manual wireless wifi graph 2 v1.png Networking rutos manual wireless wifi graph 5 v1.png


The Scans section shows visible wireless networks table. Table can be sort by SSID, signal strength, channel, width, encryption and MAC address. Example below:

Networking rutos manual wireless wifi scans.png


The Rating tab provides quality rating for each channel of selected radio band. The less noise, traffic in channel, the better rate. Networking rutos manual wireless wifi ratings v2.png