RUTX11 Ports

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 Network section > RUTX11 Ports

The information in this page is updated in accordance with firmware version RUTX_R_00.07.07.2.


The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

Port Settings

This section displays information about the status of the device's ports with the ability to configure port settings.

All Ports

The figure below is an example of the All Ports window, color indicates port speed and status:

Networking rutos manual network port all ports 4.png

To change port settings select port and press `edit (number of ports) ports` button:

Networking rutos manual network port all ports edit 4.png

You will be redirected to `Port settings`. From here you can enable/disable ports or change settings.

Networking rutos manual network port all ports port settings.png

Field Value Description
Enable off | on; default: on Toggle port on or off.
Auto negotiation off | on; default: on Auto negotiation allows the device to communicate with devices on the other end of the link to determine the optimal duplex mode and speed for the port.
Link Speed 10Mbps (E) | 100Mbps (FE); default: 10Mbps (E) A measure of how fast ports are able to transmit and receive data.
Duplex Full | Half; default: Full Bidirectional communication system that allows both end nodes to send and receive communication data or signals. Full - sends and receives simultaneously. Half - sends or receives one path at a time.
Advertisement 10M-Half | 10M-Full | 100M-Half | 100M-Full; default: Auto Advertises preferred duplex mode and speed for negotiation with other devices.

Port Status

This section displays port status information. There is also an option to select ports:

Networking rutos manual network port port status 4.png

Port Mirroring

Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets - incoming and outgoing on one Ethernet port (Source Port) to another (Monitoring Port).

Networking rutos manual network port port mirroring.png

Field Value Description
Monitoring port Disabled | LAN1 | LAN2 | LAN3; default: Disabled The port which will mirror the packets.
Source port LAN1 | LAN2 | LAN3; default: none Port whose packets will be mirrored.
Enable mirroring of incoming packets off | on; default: off
Enable mirroring of outgoing packets off | on; default: off