RUTX11 Profiles

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 System section > RUTX11 Profiles

The information in this page is updated in accordance with firmware version RUTX_R_00.02.04.1.

Summary[edit | edit source]

Configuration profiles provide a way to create multiple distinct device configuration sets and apply them to the device based on current user requirements. This chapter is an overview of the Profiles page in RUTX11 devices.

Profiles[edit | edit source]

This section displays user defined configuration profiles:

Networking rutx manual profiles configuration profiles v1.png


To create a new profile, configure the device in accordance with your needs, go to this page, enter a custom name for the profile and click the 'Add' button. A new profile with the given name will appear in the "configuration profiles" list:

Networking rutx manual profiles configuration profiles add new v1.png

The 'Apply' button applies the adjacent configuration on the device.

Scheduler[edit | edit source]

The Profile Scheduler provides a possibility to set up a schedule of when the device should use one profile configuration or another.

General Configuration[edit | edit source]


The General Configuration section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on.

Networking rutx manual profiles scheduler general v1.png

Profile Scheduler Instances[edit | edit source]


The Profile Scheduler Instances section allows you to create profile Instances to be enabled during specific time intervals. To add a new Instance click Add button.
Note: new Instance can only be created if there is atleast one custom profile created.

Networking rutx manual profiles scheduler instances v1.png

Profile Scheduler Instance Configuration[edit | edit source]


This page is used to configure profile, time and day of selected scheduler instance. Refer to the figure and table below for information on the Profile Scheduler Instance Configuration fields:

Networking rutx manual profiles scheduler instance configuration v1.png

field name value description
Enable off | on; default: off Enable selected instance for scheduler.
Profile profiles; default: none Select profile which will be applied during specified time interval.
Interval Type Weekdays | Month Days; default: Weekdays Depending on your needs select whether you want to configure weekdays or specific month days.
Start Time time; default: 12:00 Enter time of the start of interval in which scheduler will switch profiles.
End Time time; default: 12:00 Enter time of the end of interval in which scheduler will switch profiles back.
Interval Type: Weekdays
Start Day Weekday [Monday..Sunday]; default: Sunday Select a day of the start of interval in which scheduler will switch profiles.
End Day Weekday [Monday..Sunday]; default: Sunday Select a day of the end of interval in which scheduler will switch profiles back.
Interval Type: Month Days
Start Day Day of month [1..31]; default: 1 Select a day of the start of interval in which scheduler will switch profiles.
End Day Day of month [1..31]; default: 1 Select a day of the end of interval in which scheduler will switch profiles back.
Force last day off | on; default: off Force intervals to accept last day of month as valid option if selected day doesn't exist in ongoing month.