RUTX11 Supported Frequency Bands

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 Supported Frequency Bands

A frequency band is a specific range of frequencies in the radio frequency (RF) spectrum.

Summary

Different countries and network operators use different frequency bands for communication in their respective mobile networks. Therefore, in order to communicate within an operator's network, the mobile equipment to has to support the frequency bands used by that operator.

This page contains information about mobile frequency bands supported by RUTX11 routers.

Supported bands

Devices ordered under different product codes may support different frequency bands. Specifically for RUTX11 routers, the seventh symbol of the product code indicates the intended region of operation.

The table below displays bands supported by RUTX11 routers based on their product code:

Product code Region (operator)1 ..Supported bands
RUTX11 0***** Europe, the Middle East, Africa, Korea, Thailand, India, Malaysia
  • 4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28 (700 MHz), B322 (1500 MHz)
    4G (LTE-TDD): B38 (2600 MHz), B40 (2300 MHz), B41 (2500 MHz)
    2xCA: B1+B1/B5/B8/B20/B28
    B3+B3/B5/B7/B8/B20/B28
    B7+B5/B7/B8/B20/B28
    B20+B322
    B38+B38
    B40+B40
    B41+B41
  • 3G: B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz)
RUTX11 1***** North America
  • 4G (LTE-FDD): B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B12 (700 MHz), B13 (700 MHz), B25 (1900 MHz), B26 (850 MHz), B292 (700 MHz), B30 (2300 MHz), B66 (1700/2100 MHz)
    2xCA: B2+B2/B5/B12/B292
    B4+B4/B5/B12/B13/B292
    B7+B5/B7/B12/B26
    B25+B5/B12/B25/B26
    B30+B5/B12/B292
    B66+B5/B12/B13/B292/B66
  • 3G: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz)

1 Versions for other regions are under development.
2 LTE-FDD B29 and B32 supports Rx only and in 2xCA they are only used for secondary component carrier.

If you are unsure which product code is right for you, you can look up which bands are used in your region or by your operator in this website or contact your sales manager for that information.

See also