RUTX12 Supported Frequency Bands

A frequency band is a specific range of frequencies in the radio frequency (RF) spectrum.

Summary

Different countries and network operators use different frequency bands for communication in their respective mobile networks. Therefore, in order to communicate within an operator's network, the mobile equipment to has to support the frequency bands used by that operator.

This page contains information about mobile frequency bands supported by RUTX12 routers.

Supported bands

Devices ordered under different product codes may support different frequency bands. Specifically for RUTX12 routers, the seventh symbol of the product code indicates the intended region of operation.

The table below displays bands supported by RUTX12 routers based on their product code:

Product code	Region (operator)	..Supported bands
RUTX12 0*****	Europe3, the Middle East, Africa, Australia, APAC2, Brazil, Malaysia	4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28 (700 MHz), B321 (1500 MHz) 4G (LTE-TDD): B38 (2600 MHz), B40 (2300 MHz), B41 (2500 MHz) 3G: B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz)
RUTX12 1*****	North America	4G (LTE-FDD): B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B12 (700 MHz), B13 (700 MHz), B25 (1900 MHz), B26 (850 MHz), B291 (700 MHz), B30 (2300 MHz), B66 (1700/2100 MHz) 3G: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz)

¹ LTE-FDD B29 and B32 Support Rx Only, and in 2×CA it is Only for Secondary Component Carrier.
² Excluding Japan and CMCC.
³ Regional availability - excluding Russia & Belarus.

If you are unsure which product code is right for you, you can look up which bands are used in your region or by your operator in this website or contact your sales manager for that information.

See also

• Bands supported by other Teltonika Networking devices