The information in this page is updated in accordance with firmware version RUTX_R_00.07.04.5.
The Services page is used for easy service management. From here you can check the status of most services and find a link to each of their configuration pages.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
The Services list displays the status of most of the device's services.
- The figure above is only an example. The actual ordering of the services on your devices will differ.
- Most services can be configured from the WebUI's 'Services' tab. Search the RUTX50 Services section for guidance.
- The rightmost column contains a 'Change Settings' button next to each service. If you click on of these buttons, you will be redirected to the respective service's configuration window.
For example: if you click 'Change Settings' next to the RMS service, you will be redirected to the Services → Cloud Solution → RMS page.