RUTXR1 Ports

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTXR1 > RUTXR1 Manual > RUTXR1 WebUI > RUTXR1 Network section > RUTXR1 Ports

The information in this page is updated in accordance with firmware version RUTX_R_00.07.10.


Summary

The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

Port Settings

This section displays information about the status of the device's ports with the ability to configure port settings.

All Ports


The figure below is an example of the All Ports window, color indicates port speed and status:

Networking rutos manual network port all ports 5 v1.png

To change port settings select port and press `edit (number of ports) ports` button:

Networking rutos manual network port all ports edit 5.png

You will be redirected to `Port settings`. From here you can enable/disable ports or change settings.

Networking rutos manual network port all ports port settings.png

Field Value Description
Enable off | on; default: on Toggle port on or off.
Auto negotiation off | on; default: on Auto negotiation allows the device to communicate with devices on the other end of the link to determine the optimal duplex mode and speed for the port.
Link Speed 10Mbps (E) | 100Mbps (FE); default: 10Mbps (E) A measure of how fast ports are able to transmit and receive data.
Duplex Full | Half; default: Full Bidirectional communication system that allows both end nodes to send and receive communication data or signals. Full - sends and receives simultaneously. Half - sends or receives one path at a time.
Advertisement 10M-Half | 10M-Full | 100M-Half | 100M-Full| 1000M-Full; default: All Advertises preferred duplex mode and speed for negotiation with other devices.

Port Status


This section displays port status information. There is also an option to select ports:

Networking rutos manual network port port status 5.png

Port Mirroring

Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets - incoming and outgoing on one Ethernet port (Source Port) to another (Monitoring Port).


Networking rutos manual network port port mirroring.png

Field Value Description
Monitoring port Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: Disabled The port which will mirror the packets.
Source port Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: none Port whose packets will be mirrored.
Enable mirroring of incoming packets off | on; default: off
Enable mirroring of outgoing packets off | on; default: off

802.1X Client

802.1X is a network authentication protocol that opens ports for network access when an organization authenticates a user's identity and authorizes them for access to the network. The user's identity is determined based on their credentials or certificate, which is confirmed by the authentication server.

All Ports


The figure below is an example of the All Ports window, color indicates port speed and status:

Networking rutos manual network port all ports 5 v1.png

To change port settings select port and press `edit (number of ports) ports` button:

Networking rutos manual network port all ports edit 5.png

You will be redirected to `Port settings`. From here you can change 802.1X settings.

Networking rutos manual network port 8021x port settings.png

Field Value Description
Enable off | on; default: off Toggle 802.1x on or off.
Auth type MD5 | TLS | PWD | Tunneled TLS | Protected EAP (PEAP); default: MD5 Authentication type.
Identity (Username) string; default: none Used as the username for authentication.
MD5, PWD, Tunneled TLS, Protected EAP (PEAP): Password string; default: none Used for authentication.
TLS: CA Certificate .crt file; default: none Radius server CA certificate.
TLS: User certificate .crt file; default: none TLS client certificate.
TLS: Private Key .key file; default: none TLS Private Key.
TLS: Private Key Password string; default: none TLS Private Key Password.
Tunneled TLS: Inner authentication PAP | MSCHAP | MSCHAPv2 | MSCHAPv2 (no EAP) | CHAP | MD5 | GTC; default: PAP Inner authentication type.
Protected EAP (PEAP): Inner authentication MSCHAPv2 | MD5 | GTC; default: MSCHAPv2 Inner authentication type.
Protected EAP (PEAP): Peap version auto | 0 | 1; default: auto Peap version.
Tunneled TLS, Protected EAP (PEAP): Anonymous identity string; default: none Shown as username outside the encrypted tunnel. Not used for authentication.
Tunneled TLS, Protected EAP (PEAP): CA Certificate .crt file; default: none Radius server CA certificate.

Port Status


This section displays port status information. There is also an option to select ports:

Networking rutos manual network port port status 5 8021x.png