Changes

</pre>[[File:Zerotier configuration interface name v1.png]]

</pre>[[File:Zerotier configuration interface name v1.png]]

*Navigate to Network → Interfaces → LAN → Physical settings → Interface and add the ZeroTier interface name we found out in the previous step.

*Navigate to '''''Network → Interfaces → LAN → Physical settings → Interface''''' and add the ZeroTier interface name we found out in the previous step.

*Save & Apply settings

*Save & Apply settings

[[File:Zerotier configuration physical settings v1.png|class=tlt-border|1050x1050px]]

[[File:Zerotier configuration physical settings v1.png|border|class=tlt-border|1050x1050px]]

===Second Router===

===Second Router===

----

----

*Navigate to Network → Interfaces → LAN → Physical settings → Interface and add the ZeroTier interface name we found out in the previous step.

*Navigate to '''''Network → Interfaces → LAN → Physical settings → Interface''''' and add the ZeroTier interface name we found out in the previous step.

*Navigate to Network → Interfaces → LAN → General settings and change the IPv4 address to an IP that is in the same subnet as the first router (We will use 192.168.1.2 for this example)

*Navigate to '''''Network → Interfaces → LAN → General settings''''' and change the '''IPv4 address''' to an IP that is in the same subnet as the first router (We will use 192.168.1.2 for this example)

*Navigate to Network → Interfaces → LAN → DHCP Server and Disable DHCP server option

*Navigate to '''''Network → Interfaces → LAN → DHCP Server''''' and Disable '''DHCP server''' option

*Save & Apply settings

*Save & Apply settings

[[File:Zerotier configuration physical settings v1.png|class=tlt-border|1044x1044px]]

[[File:Zerotier configuration physical settings v1.png|border|class=tlt-border|1044x1044px]]

[[File:Zerotier configuration rut 2 configuration v1.png|class=tlt-border]]

[[File:Zerotier configuration rut 2 configuration v1.png|border|class=tlt-border]]

===ZeroTier Portal===

===ZeroTier Portal ===

----

----

*Open your ZeroTier Portal (https://my.zerotier.com/) and navigate to your ZeroTier Network.

*Open your ZeroTier Portal (https://my.zerotier.com/) and navigate to your ZeroTier Network.

*Scroll down to Members and enable "Allow Ethernet Bridging" option on both devices

*Scroll down to Members and enable '''"Allow Ethernet Bridging"''' option on both devices

[[File:Zerotier configuration portal configuration v1.png|798x798px]]

[[File:Zerotier configuration portal configuration v1.png|798x798px]]