505
edits
Changes
Template:Networking tsw2xx manual powering options (view source)
Revision as of 11:27, 16 December 2022
, 11:27, 16 December 2022no edit summary
* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use {{{name}}} PoE ports with '''LAN1''' ports on Teltonika devices).
* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use {{{name}}} PoE ports with '''LAN1''' ports on Teltonika devices).
* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).
* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).
If {{{name}}} and a Passive PoE device are connected with common ground, '''do not use LAN1 port''', other ports can be used (refer to image below):
If {{{name}}} and a Passive PoE device are connected with common ground, '''do not use LAN1 port''', other ports can be used (refer to image below):
[[File:Passive - Active PoE common ground connection.jpg|600px|border|class=tlt-border]]
[[File:Passive - Active PoE common ground connection.jpg|600px|border|class=tlt-border]]
|}}
[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]
