569
edits
Changes
VLAN Inter-Zone accessibility control configuration example (view source)
Revision as of 14:42, 2 August 2023
, 14:42, 2 August 2023no edit summary
<p style="color:red">The information in this page is updated in accordance with firmware version '''[https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads 00.07.03]'''.
==Introduction==
==Introduction==
In order to get more control over VLANs, an '''inter-zone''' forwarding functionality should be used. Here is a network topology with firewall zones and an explanation.
In order to get more control over VLANs, an '''inter-zone''' forwarding functionality should be used. Here is a network topology with firewall zones and an explanation.
[[File:518924 vlanzones.png|600px|border|class=tlt-border]]
[[File:3zonetopology.png|600px|border|class=tlt-border]]
To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press ADD button to add a new zone.
To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press ADD button to add a new zone.
Using these examples as a base, you can allow / reject VLAN to VLAN communication between different VLANs according to your needs.
Using these examples as a base, you can allow / reject VLAN to VLAN communication between different VLANs according to your needs.
[[Category:Router control and monitoring]]
