Changes

no edit summary
Line 1: Line 1: −
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.03.3'''] firmware version .</p>
+
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.08'''] firmware version .</p>
 
==Introduction==
 
==Introduction==
 
This article provides a guide on how to configure '''SMS''' and '''Email''' alerts using '''I/O Juggler''' on '''Teltonika Networks''' Routers and Gateways when the main power supply is being cut and the device switches onto the Backup Power from - '''BAT120'''.
 
This article provides a guide on how to configure '''SMS''' and '''Email''' alerts using '''I/O Juggler''' on '''Teltonika Networks''' Routers and Gateways when the main power supply is being cut and the device switches onto the Backup Power from - '''BAT120'''.
    
----
 
----
* First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings.
+
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI" mode.''' You can do that by clicking the "Advanced" button, located at the top of the WebUI.
[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_webui_basic_advanced_mode_75.gif|border|center|class=tlt-border|1102x93px]]
 
----
 
----
   Line 14: Line 14:  
* One of Teltonika Networks '''Routers''' or '''Gateways''' ('''RUT955''' is being used in the example)
 
* One of Teltonika Networks '''Routers''' or '''Gateways''' ('''RUT955''' is being used in the example)
 
* '''BAT120'''
 
* '''BAT120'''
* '''2 SIM card''', that allows sending SMS messages(One used by RUT955 and one by the client at the receiving end)
+
* '''2 SIM card''', that allows sending SMS messages(One used by RUT956 and one by the client at the receiving end)
 
* '''2 Email accounts''' (Two accounts are being used in this example: one Google Mail and one Teltonika)
 
* '''2 Email accounts''' (Two accounts are being used in this example: one Google Mail and one Teltonika)
   Line 20: Line 20:     
* Connect Power Supply to '''BAT120''' '''IN PWR'''
 
* Connect Power Supply to '''BAT120''' '''IN PWR'''
* Connect '''BAT120''' '''OUT PWR''' to '''RUT955''' Power Socket
+
* Connect '''BAT120''' '''OUT PWR''' to '''RUT956''' Power Socket
    
==Use Case Topology==
 
==Use Case Topology==
[[File:Power Supply BAT120 Use Case v1.png|border|class=tlt-border]]
+
[[File:708877_1.png|border|class=tlt-border]]
   −
'''Where:'''<br>
+
'''Scenario:'''<br>
 
'''1.'''Power is being cut from the '''main Power Supply''' for '''BAT120'''<br>
 
'''1.'''Power is being cut from the '''main Power Supply''' for '''BAT120'''<br>
 
'''2.'''Once '''BAT120''' recognizes that '''IN PWR''' is no longer receiving any Input from '''Main Power supply''', it sends a '''12 VDC''' alarm via its '''OUT PWR'''<br>
 
'''2.'''Once '''BAT120''' recognizes that '''IN PWR''' is no longer receiving any Input from '''Main Power supply''', it sends a '''12 VDC''' alarm via its '''OUT PWR'''<br>
'''3.''' '''RUT955''' receives an '''Alarm Signal''' from '''BAT120''' via its '''INPUT PIN 3''', which changes the pin state from '''Low''' to '''High'''<br>
+
'''3.''' '''RUT956''' receives an '''Alarm Signal''' from '''BAT120''' via its '''INPUT PIN 3''', which changes the pin state from '''Low''' to '''High'''<br>
 
'''4.''' An E-mail and SMS alerts are being sent to the end user<br>
 
'''4.''' An E-mail and SMS alerts are being sent to the end user<br>
   Line 36: Line 36:     
'''1.''' Navigate to '''System -> Administration -> Recipients -> E-mail Users (1)''' type in the '''Name (2)''' and '''add (3)''' a New Instance
 
'''1.''' Navigate to '''System -> Administration -> Recipients -> E-mail Users (1)''' type in the '''Name (2)''' and '''add (3)''' a New Instance
[[File:Adding New Recipient RutOS73.png|1002px|border|class=tlt-border]]
+
[[File:Bat120_trigger_sms_email_7.8_add_email.png|1100px|border|class=tlt-border]]
    
'''2.''' An advanced configuration window will open, in there, type in the details for your E-mail account. In this example, Gmail account is being used, therefore the following configuration is required:
 
'''2.''' An advanced configuration window will open, in there, type in the details for your E-mail account. In this example, Gmail account is being used, therefore the following configuration is required:
   −
[[File:Adding New Recipient RutOS73 2.png|1002px|border|class=tlt-border]]
+
[[File:Bat120_trigger_sms_email_7.8_add_email_config.png|1013 × 440px|border|class=tlt-border]]
    
# Secure Connection: '''on''' <br>
 
# Secure Connection: '''on''' <br>
Line 55: Line 55:  
=== I/O Juggler actions Configuration ===
 
=== I/O Juggler actions Configuration ===
 
----
 
----
'''1.''' Open your '''Routers (RUT955)''' WebUI <br>
+
'''1.''' Open your '''Routers (RUT956)''' WebUI <br>
 
'''2.''' Navigate to: '''Services -> Input/Output -> I/O Juggler -> Actions (1) -> Add two New Instances (2)''': one with type SMS and another one with type Email '''(3)'''. A configuration window will open, you need to select accordingly. <br>
 
'''2.''' Navigate to: '''Services -> Input/Output -> I/O Juggler -> Actions (1) -> Add two New Instances (2)''': one with type SMS and another one with type Email '''(3)'''. A configuration window will open, you need to select accordingly. <br>
'''2.1''' Adding SMS Action:[[File:Add SMS Action RutOS73.png|1002px|border|class=tlt-border]] <br>
+
'''2.1''' Adding SMS Action:<br>[[File:Bat120_trigger_sms_email_7.8_add_action.png|1058 × 424px|border|class=tlt-border]] <br>
 
'''2.2''' Configuring SMS Action: <br>
 
'''2.2''' Configuring SMS Action: <br>
Type: '''SMS''' <br>
+
 
Text Message: '''Your Preferred SMS text''' <br>
+
[[File:Bat120_trigger_sms_email_7.8_add_action_config.png|1010 × 618px|border|class=tlt-border]]
Recipient's phone number: '''Phone number of the recipient''' with the country code, for example, +370... <br>
+
 
Click '''Save & Apply'''. <br><br>
+
# Type: '''SMS''' <br>
 +
# Text Message: '''Your Preferred SMS text''' <br>
 +
# Recipients: '''Number of recipients''' <br>
 +
# Recipient's phone number: '''Phone number of the recipient''' with the country code, for example, +370... <br>
 +
# Click '''Save & Apply'''. <br>
 
'''Note:''' You could send the SMS alerts to '''more than one phone number''' as well, this is called '''Phone Groups'''. To create one, the process is very similar to creating an Email Recipient described above, you would need to navigate to ''' System -> Administration -> Recipients -> Phone Groups'''. Once created, your created Phone groups will be available for selection within our I/O Juggler. <br>
 
'''Note:''' You could send the SMS alerts to '''more than one phone number''' as well, this is called '''Phone Groups'''. To create one, the process is very similar to creating an Email Recipient described above, you would need to navigate to ''' System -> Administration -> Recipients -> Phone Groups'''. Once created, your created Phone groups will be available for selection within our I/O Juggler. <br>
[[File:SMS Instance.png|1102px|border|class=tlt-border]]
+
 
 
'''2.3''' Adding Email Action: <br>
 
'''2.3''' Adding Email Action: <br>
[[File:Add Email Action.png|1102px|border|class=tlt-border]]
+
[[File:Bat120_trigger_sms_email_7.8_add_action_email.png|1100px|border|class=tlt-border]]<br>
 
'''2.4''' Configuring Email Action: <br>
 
'''2.4''' Configuring Email Action: <br>
Type: '''Email''' <br>
+
[[File:Bat120_trigger_sms_email_7.8_add_action_email_config.png|1100px|border|class=tlt-border]]
Subject: '''Your preferred subject''' <br>
+
# Type: '''Email''' <br>
Text message: '''Your preferred text message''' <br>
+
# Subject: '''Your preferred subject''' <br>
Email account: '''Recipient (Created earlier)''' <br>
+
# Text message: '''Your preferred text message''' <br>
Recipient’s email address: '''Recipient’s e-mail address''' <br> <br>
+
# Email account: '''Recipient (Created earlier)''' <br>
[[File:Email Instance.png|1102px|border|class=tlt-border]]
+
# Recipient’s email address: '''Recipient’s e-mail address''' <br>
 +
# '''Save & Apply''' configuration <br>
 +
 
 
'''2.5''' Once finished, your configuration should look like this:
 
'''2.5''' Once finished, your configuration should look like this:
[[File:Actions Configured.png|1102px|border|class=tlt-border]]
+
[[File:Bat120_trigger_sms_email_7.8_overall_actions.png|1051 × 465px|border|class=tlt-border]]
 
=== I/O Juggler General Configuration===
 
=== I/O Juggler General Configuration===
'''1.''' Navigate to: '''Services -> Input/Output -> General -> Add new Instance -> Select Role Input (3)''' and click on '''Add''' <br>
+
----
[[File:Adding Input.png|1102px|border|class=tlt-border]]
+
'''1.''' Navigate to: '''Services -> Input/Output -> General (1) -> Add new Instance (2) -> Select Role Input (3)''' and click on '''Add (4)''' <br>
 +
[[File:Bat120_trigger_sms_email_7.8_add_io.png|1100px|border|class=tlt-border]] <br>
 
'''2.''' Another configuration window will open, you would need to select: <br>
 
'''2.''' Another configuration window will open, you would need to select: <br>
Enabled: '''on''' <br>
+
[[File:Bat120_trigger_sms_email_7.8_add_io_config.png|1100px|border|class=tlt-border]] <br>
Trigger: '''Rising''' <br>
+
# Enabled: '''on''' <br>
Add actions: '''BAT_SMS''' and '''BAT_Email''' that you have configured previously. <br>
+
# Trigger: '''Rising''' <br>
Click '''Save & Apply'''. <br>
+
# Add actions: '''BAT_SMS''' and '''BAT_Email''' that you have configured previously. <br>
[[File:Input Output Input 3 Configuration.png|1102px|border|class=tlt-border]] <br>
+
# Click '''Save & Apply'''. <br>
'''3.''' Navigate to '''Services -> Input/Output -> General -> General drop-down menu and enable I/O Juggler''' and click on '''Save & Apply''' <br>
  −
[[File:Enabling Juggler.png|1102px|border|class=tlt-border]]
   
==Verification==
 
==Verification==
 
Once Configured according to this example, in the case of RUT955 (or any other Teltonika Networks Router/Gateway) losing connection to its main Power Source '''BAT120''' will take over and will forward an up to '''12V Alarm Signal''' to '''INPUT PIN 3'''.<br>
 
Once Configured according to this example, in the case of RUT955 (or any other Teltonika Networks Router/Gateway) losing connection to its main Power Source '''BAT120''' will take over and will forward an up to '''12V Alarm Signal''' to '''INPUT PIN 3'''.<br>

Navigation menu