90
edits
Changes
Wireless Mesh configuration example (view source)
Revision as of 12:41, 21 February 2023
, 12:41, 21 February 2023→Common settings
<li>In '''Wireless Security''' tab select Encryption '''WPA3 – SAE''' and enter the Password. '''The password must match in all devices'''.</li>
<li>In '''Wireless Security''' tab select Encryption '''WPA3 – SAE''' and enter the Password. '''The password must match in all devices'''.</li>
<li>In '''Advanced Settings''' tab enable Forward mesh peer traffic and set RSSI threshold for joining to '''-80'''. Leave the rest as set by default.</li>
<li>In '''Advanced Settings''' tab enable Forward mesh peer traffic and set RSSI threshold for joining to '''-80'''. Leave the rest as set by default.</li>
<li>Lastly, press '''Edit''' on general radio settings.</li>
<li>Set Channel. Channel must be '''the same in all of the routers'''</li>
</ol>
</ol>
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_1_v2.png|border|class=tlt-border]]
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_1_v2.png|border|class=tlt-border]]
[[File:Networking rutx11 configuration example wireless mesh mesh common configuration 7 v2.png|border|class=tlt-border]]
[[File:Networking rutx11 configuration example wireless mesh mesh common configuration 7 v2.png|border|class=tlt-border]]
----
----
===Mesh nodes===
===Mesh nodes===
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. These settings should also be set after configuring access and mesh points settings, as, otherwise, access to the router will be lost. The configuration is as follows:
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. These settings should also be set after configuring access and mesh points settings, as, otherwise, access to the router will be lost. The configuration is as follows:
