1,108
edits
Changes
no edit summary
The command returns battery charge status '''<bcs>''' and battery charge level '''<bcl>''' of the MT
The command returns battery charge status '''<bcs>''' and battery charge level '''<bcl>''' of the MT
===AT+QADC Read ADC Value ===
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=208&zoom=100,68,498 AT+QADC Read ADC Value] ===
----
----
The command is used to read the voltage value of ADC channel.
The command is used to read the voltage value of ADC channel.
===AT+QSCLK Enable/Disable Entering into Sleep Mode ===
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=209&zoom=100,68,181 AT+QSCLK Enable/Disable Entering into Sleep Mode] ===
----
----
The command is used to control whether the module enters into sleep mode. When entering into sleep mode is enabled, DTR is pulled up and WAKEUP_IN is pulled up, the module can directly enter into sleep mode. If entering into sleep mode is enabled, DTR is pulled down and WAKEUP_IN is pulled down, there is a need to pull the DTR pin and the WAKEUP_IN pin up first, and then the module can enter into sleep mode.
The command is used to control whether the module enters into sleep mode. When entering into sleep mode is enabled, DTR is pulled up and WAKEUP_IN is pulled up, the module can directly enter into sleep mode. If entering into sleep mode is enabled, DTR is pulled down and WAKEUP_IN is pulled down, there is a need to pull the DTR pin and the WAKEUP_IN pin up first, and then the module can enter into sleep mode.
[[Category:TRM240 AT Commands]]
[[Category:TRM240 AT Commands]]