489
edits
Changes
TRB141 1-Wire Setup/Configuration (view source)
Revision as of 11:26, 8 March 2023
, 11:26, 8 March 2023Created page with "<p style="color:red">The information on this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.04'''] firmware version...."
<p style="color:red">The information on this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.04'''] firmware version.</p>
==Introduction==
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''.
== Prerequisites ==
* TRB141
* 1-Wire sensor
* IF 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141
==Connecting 1-Wire Sensor with TRB141==
==Introduction==
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''.
== Prerequisites ==
* TRB141
* 1-Wire sensor
* IF 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141
==Connecting 1-Wire Sensor with TRB141==