Changes

The <b>Wireless</b> section of the Network tab can be used to manage and configure WiFi Access Points and WiFi Stations (clients) . This chapter of the user manual provides an overview of the Wireless section for {{{name}}} devices.

The <b>Wireless</b> section of the Network tab can be used to manage and configure WiFi Access Points and WiFi Stations (clients) . This chapter of the user manual provides an overview of the Wireless section for {{{name}}} devices.

{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer

{{#ifeq: {{{series}}} | TAP100 | |{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer

| series = {{{series}}}

| series = {{{series}}}

}}

}}}}

==Wireless technology==

==Wireless technology==

}}

}}

==WiFi 2.4 GHz {{#ifeq:{{{wifi}}}|5|& 5 GHz|}}==

=={{#ifeq:{{{series}}}|TAP100|SSIDS|WiFi 2.4 GHz}} {{#ifeq:{{{wifi}}}|5|& 5 GHz|}}==

The <b>WiFi 2.4 GHz {{#ifeq:{{{wifi}}}|5|& 5 GHz|}}</b> section is used to configure your wireless access points (AP) and wireless clients (STA).

The <b>{{#ifeq:{{{series}}}|TAP100|SSIDS|WiFi 2.4 GHz}} {{#ifeq:{{{wifi}}}|5|& 5 GHz|}}</b> section is used to configure your wireless access points (AP) and wireless clients (STA).

[[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_{{#ifeq:{{{series}}}|TCR1|tcr1_|}}v2.png|border|class=tlt-border]]

{{#switch:{{{series}}}

|TCR1 = [[File:Networking_rutos_manual_wireless_wifi_5_tcr1_v2.png]]

|TAP100 = [[File:Networking_rutos_manual_wireless_wifi_2_tap100_v2.png]]

|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v2.png|border|class=tlt-border]]

Above is the overview of the Wireless Overview window. It displays active access points and stations.  

Above is the overview of the {{#ifeq:{{{series}}}|TAP100|SSIDS|Wireless}} Overview window. It displays active access points{{#ifeq:{{{series}}}|TAP100|.| and stations.}}

Here you can turn on or off your WiFi interfaces, remove them or start configuring by clicking on  

Here you can turn on or off your WiFi interfaces, remove them or start configuring by clicking on  

[[File:Networking rutx manual edit button v1.png]] <b>Edit</b> button on the right side of interface.  

[[File:Networking rutx manual edit button v1.png]] <b>Edit</b> button on the right side of interface.  

You can also configure your WiFi devices by clicking [[File:Networking rutx manual edit button v1.png]] <b>Edit</b> button  

You can also configure your WiFi devices by clicking [[File:Networking rutx manual edit button v1.png]] <b>Edit</b> button  

in the right side of each table header.  

in the right side of each table header.  

To configure your Wireless device as Client press '''Scan''' button to scan the surrounding area and attempt to connect to a new wireless access point.

{{#ifeq:{{{series}}}|TAP100||To configure your Wireless device as Client press '''Scan''' button to scan the surrounding area and attempt to connect to a new wireless access point.}}

{{#ifeq: {{{series}}} | TCR1 |

{{#ifeq: {{{series}}} | TCR1 |

}}

}}

==Global Settings==

=={{#ifeq:{{{series}}}|TAP100|Radio|Global}} Settings==

The <b>Global Settings</b> section is used for configuring WiFi hardware parameters. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → Wireless page:

The <b>{{#ifeq:{{{series}}}|TAP100|Radio|Global}} Settings</b> section is used for configuring WiFi hardware parameters. You can find this section {{#ifeq:{{{series}}}|TAP100||by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>)}} in the Network → {{#ifeq:{{{series}}}|TAP100|Radio|Wireless}} page:

[[File:Networking_rutos_manual_wireless_global_settings_edit_button_{{#ifeq:{{{series}}}|TCR1|tcr1_|}}v2.png|border|class=tlt-border]]

{{#switch:{{{series}}}

|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v2.png]]

|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v2.png]]

|#default = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_v2.png|border|class=tlt-border]]

===General Setup===

===General Setup===