360
edits
Changes
Template:Networking rutos manual snmp (view source)
Revision as of 09:40, 27 March 2023
, 09:40, 27 March 2023→Trap Settings: Added TCR100, RUTXR1, RUT2M, RUT9M information.
<br>
<br>
|}}
|}}
{{#switch: {{{name}}}|RUTXR1|TCR100 =|
====Input/Output====
====Input/Output====
----
----
</tr>
</tr>
{{#switch:{{{series}}}
{{#switch:{{{series}}}
|RUTX|RUTM|RUT2 =
|RUTX|RUTM|RUT2|RUT2M =
<tr>
<tr>
<td>Trigger</td>
<td>Trigger</td>
<td>Trigger</td>
<td>Trigger</td>
<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>State change</td>
<td>High level {{!}} Low level {{!}} Both; default: <b>Both</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
|}}
|RUT9M =
{{#ifeq:{{{name}}}|RUT956|
<tr>
<td>Trigger</td>
<td><span style="color:red">Analog Current Loop (6,9)</span> {{!}} <span style="color:red">Analog Input (6,9)</span> {{!}} Input (3) {{!}} Digital Input (1) {{!}} Output (4) {{!}} Isolated output (3,4,8) {{!}} Isolated Input (2,7) {{!}} <span style="color:blue">Relay (5,10)</span>; default: <b>Analog Current Loop (6,9)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>State change</td>
<td>High level {{!}} Low level {{!}} Both; default: <b>Both</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:red">Analog Current Loop (6,9), Analog Input (6,9):</span> State change</td>
<td>In range {{!}} Out of range {{!}} Both; default: <b>Both</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:blue">Relay (5,10):</span> State change</td>
<td>Open {{!}} Closed {{!}} Both; default: <b>Both</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:red">Analog Current Loop (7), Analog Input (7):</span> Min voltage</td>
<td>positive float; default: <b>none</b></td>
<td>At which minimum voltage value will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:red">Analog Current Loop (7), Analog Input (7):</span> Max voltage</td>
<td>positive float; default: <b>none</b></td>
<td>At which maximum voltage value will this rule be triggered. Must be higher than Min voltage.</td>
</tr>
|
<tr>
<td>Trigger</td>
<td>Input (3) {{!}} Output (4); default: <b>Input (3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
</table>
</table>
}}
==SNMP variables list==
==SNMP variables list==
