Changes

*Scroll down to Members and enable '''"Allow Ethernet Bridging"''' option on both devices

*Scroll down to Members and enable '''"Allow Ethernet Bridging"''' option on both devices

*'''NOTE: Kindly remove any Managed IPs that might have stayed when the Auto-assigned feature was turned on ( By default, ZeroTier keeps it ON ).'''

*'''NOTE: Kindly remove any Managed IPs that might have stayed when the Auto-assigned feature was turned on ( By default, ZeroTier keeps it ON ).'''

[[File:ZeroTier Portal Bridging v1.1.png|500×200]]

[[File:ZeroTier Portal Bridging v1.3.png|500×200]]

[[File:ZeroTier Portal Bridging v1.2.png|500x200]]

[[File:ZeroTier Portal Bridging v1.2.png|500x200]]

*Make sure to turn off '''Auto-Assign from Range''' in the '''advanced section'''. Since this is a Layer 2 bridge configuration, there is no need for IP addresses on the ZeroTier Interfaces and managed IPs. With Layer 2 bridging, devices communicate directly using their local MAC addresses, eliminating the necessity for IP address management.

*Make sure to turn off '''Auto-Assign from Range''' in the '''advanced section'''. Since this is a Layer 2 bridge configuration, there is no need for IP addresses on the ZeroTier Interfaces and managed IPs. With Layer 2 bridging, devices communicate directly using their local MAC addresses, eliminating the necessity for IP address management.