695
edits
Changes
Draft:RMS Alerts & Automations (view source)
Revision as of 16:22, 20 July 2023
, 16:22, 20 July 2023no edit summary
#Description.
#Description.
#Category/Group on which condition parameter will be chosen.
#Category/Group on which condition parameter will be chosen.
#Enable Cooldown.
#Enable Cooldown. Cooldown waits to execute further actions after the first/main IF condition is triggered.
#Cooldown timer (in minutes).
#Cooldown timer (in minutes).
#Enable Delay.
#Enable Delay. Delay will wait for multiple main IF condition triggers. E.g. if you'd like to
#Delay timer (in seconds).
#Delay timer (in seconds).
#Delay repetitions.
#Delay repetitions.
#By clicking here, you will be directed to the edit/create template window.
#By clicking here, you will be directed to the edit/create template window.
#Shows how many devices have this template applied on them.
#Shows how many devices have this template applied to them.
#Shows how many times the template action was triggered in the 24h period.
#Shows how many times the template action was triggered in the 24h period.
#Switch between Devices and Logs tabs.
#Switch between Devices and Logs tabs.
#Go to that device's details or filter template action logs for this device.
#Go to that device's details or filter template action logs for this device.
#Enable template on this device (when the template is applied on the device, it needs to be enabled on it too).
#Enable template on this device (when the template is applied on the device, it needs to be enabled on it too).
#Change table settings, refresh data.
#Change table settings, and refresh data.
=Examples=
==Getting informed when the device's temperature is high==
If you'd like to get notified when the device's temperature is reaching high levels you can create this template:
#Parameters group: Dynamic information
#
