7,491
edits
Changes
Template:Networking rutos manual lan (view source)
Revision as of 11:41, 7 September 2023
, 11:41, 7 September 2023no edit summary
====General setup====
====General setup====
he <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.
[[File:Networking_rutos_manual_lan_configuration_dhcp_server_general_setup.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>Hours | Minutes | Seconds; default: <b>Hours</b></td>
<td>Hours | Minutes | Seconds; default: <b>Hours</b></td>
<td>Lease time measurement units.</td>
<td>Lease time measurement units.</td>
</tr>
</table>
====Advanced settings====
Refer to the table below for information on the <b>Advanced Settings</b> section.
[[File:Networking_rutos_manual_lan_configuration_dhcp_server_advanced_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Dynamic DHCP</td>
<td>off | on; default: <b>on</b></td>
<td>Enables dynamic allocation of client addresses. If this is disabled, only clients that have static IP leases will be served.</td>
</tr>
<tr>
<td>Force</td>
<td>off | on; default: <b>off</b></td>
<td>The DHCP force function ensures that the device will always start it’s DHCP server, even if there is another DHCP server already running in the its network. By default the device’s DHCP server will not start when it is connected to a network segment that already has a working DHCP server.</td>
</tr>
<tr>
<td>IPv4-Netmask</td>
<td>netmask; default: <b>none</b></td>
<td>Sends a different netmask than the LAN netmask to DHCP clients.</td>
</tr>
<tr>
<td>Custom DHCP Options</td>
<td>-(interactive button)</td>
<td>Custom DHCP options are number and value pairs used to configure advanced DHCP functionality. It does not configure DHCP ipv6!</td>
</tr>
<tr>
<td>Force DHCP options</td>
<td>off | on; default: <b>off</b></td>
<td>If enabled, DHCP options will be sent even if it's not requested.</td>
</tr>
</table>
====DHCP Server: IPv6 Settings====
----
Refer to the table below for information on the <b>IPv6 Settings</b> section.
[[File:Networking_rutos_manual_lan_configuration_dhcp_server_ipv6_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Router Advertisement Service</td>
<td>Disabled | Relay mode | Server mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether router advertisements should be enabled (server mode), relayed or disabled. </td>
</tr>
<tr>
<td>DHCPv6 Service</td>
<td>Disabled | Relay mode | Server mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled).</td>
</tr>
<tr>
<td>NDP Proxy</td>
<td>Disabled | Relay mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether NDP should be relayed or disabled.</td>
</tr>
<tr>
<td>Announced DNS server</td>
<td>ip; default: <b>none</b></td>
<td>Supplements DHCP-assigned DNS server entries with ones specified in this field.</td>
</tr>
<tr>
<td>Announced DNS domains</td>
<td>ip; default: <b>none</b></td>
<td>DNS domain handed out to DHCP clients.</td>
</tr>
</tr>
</table>
</table>
