1,223
edits
Changes
Template:Networking rutos manual wireless (view source)
Revision as of 11:27, 11 September 2023
, 11:27, 11 September 2023no edit summary
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
[[File:Networking rutos manual wireless mesh gateway 1.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway 1_v2.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
[[File:Networking rutos manual wireless mesh gateway 2.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway 2_v2.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
[[File:Networking rutos manual wireless mesh gateway 3.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway 3_v2.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
