7,494
edits
Changes
Template:Networking rutos manual wireless (view source)
Revision as of 12:44, 15 September 2023
, 12:44, 15 September 2023no edit summary
<th>Value</th>
<th>Value</th>
<th>Description</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Enables or disables WiFi interface.</td>
</tr>{{#ifeq:{{{series}}}|TAP100||
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Mode</td>
<td>Mode</td>
<td>Access Point {{!}} Client {{!}} Mesh {{!}} Multi AP; default: <b>Access Point</b></td>
<td>Client {{!}} Access Point {{!}} Mesh {{!}} Multi AP; default: <b>Access Point</b></td>
<td>Defines what role this interface will do, Access point to supply WiFi for other devices, Client to use other devices WiFi for WWAN and Mesh to act as mesh network gateway or a node in a mesh network.</td>
<td>Defines what role this interface will do, Access point to supply WiFi for other devices, Client to use other devices WiFi for WWAN and Mesh to act as mesh network gateway or a node in a mesh network.</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<th>Access Point mode</th>
<th></th>
<th></th>
</tr>}}
</tr>}}
<tr>
<tr>
<td>ESSID</td>
<td>{{#ifeq:{{{series}}}|TAP100|SSID|ESSID}}</td>
<td>Factory ESSID is different for every device; default: <b>none</b></td>
<td>Factory {{#ifeq:{{{series}}}|TAP100|SSID|ESSID}} is different for every device; default: <b></b></td>
<td>Extended Service Set Identifier.</td>
<td>{{#ifeq:{{{series}}}|TAP100|Service Set Identifier.|Extended Service Set Identifier is a name used to identify access point which is shown when client tries to connect to it.}}</td>
</tr>
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<td>Password</td>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>{{#ifeq:{{{series}}}|TAP100|
</tr>}}{{#ifeq:{{{series}}}|TAP100|
<tr>
<tr>
<td>Encryption</td>
<td>Encryption</td>
Opportunistic Wireless Encryption (<b>OWE</b>) - no password is required and
Opportunistic Wireless Encryption (<b>OWE</b>) - no password is required and
all wireless traffic is encrypted (safer than <b>No Encryption</b>).</td>
all wireless traffic is encrypted (safer than <b>No Encryption</b>).</td>
</tr>
<tr>
<td>VLAN ID</td>
<td>integer [1..4094]; default: <b>Default</b></td>
<td>Choose default or define a network VLAN ID.</td>
</tr>||}}{{#ifeq:{{{series}}}|TAP100||
</tr>||}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>network interfaces; default: <b>lan</b></td>
<td>network interfaces; default: <b>lan</b></td>
<td>Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.</td>
<td>Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Hide ESSID</td>
<td>Hide ESSID</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Hide extended Service Set Identifier.</td>
<td>Hide extended Service Set Identifier.</td>
</tr>
</tr>{{#ifeq:{{{series}}}|TCR1|
<tr>
<tr>
<td>WPS</td>
<td>WPS</td>
<td>off {{!}} on; default: <b>on (2.4GHz) {{!}} off (5GHz)</b></td>
<td>off {{!}} on; default: <b>on (2.4GHz) {{!}} off (5GHz)</b></td>
<td>Enable WPS push-button configuration method. It can only be enabled for a single wireless interface..</td>
<td>Enable WPS push-button configuration method. It can only be enabled for a single wireless interface..</td>
</tr>|}}{{#ifeq:{{{series}}}|TAP100||
</tr>|}}}}
<tr>
<td>802.11r Fast Transition</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enables fast roaming among access points that belong to the same Mobility Domain </td>
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<th>Client mode</th>
<th>Client mode</th>
<th></th>
<th></th>
<th></th>
<th></th>
</tr>
<tr>
<td>ESSID</td>
<td>Factory ESSID is different for every device; default: <b></b></td>
<td>Extended Service Set Identifier is a name used to identify access point to which client will connect.</td>
</tr>
</tr>
<tr>
<tr>
<td>Basic service set identifier.</td>
<td>Basic service set identifier.</td>
</tr>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<th>Mesh mode</th>
<th>Mesh mode</th>
<td>integer; default: <b>none</b></td>
<td>integer; default: <b>none</b></td>
<td>Mesh network identifier.</td>
<td>Mesh network identifier.</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<th>Multi AP</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>
<tr>
<td>Scan time (sec)</td>
<td>number; default: <b>60</b></td>
<td>Time between scans of available access points (minimum 30 sec.)</td>
</tr>
<tr>
<td>Upload AP list</td>
<td>- (interactive button)</td>
<td>Uploads a list of access point configurations.</td>
</tr>}}
</tr>}}
</table>
</table>
<td>Encryption</td>
<td>Encryption</td>
<td>No encryption {{!}} WPA-PSK {{!}} WPA-PSK/WPA2-PSK Mixed Mode {{!}} WPA2-PSK {{!}} WPA-EAP {{!}} WPA2-EAP {{!}}
<td>No encryption {{!}} WPA-PSK {{!}} WPA2-PSK {{!}} WPA-PSK/WPA2-PSK Mixed Mode {{!}} WPA3-SAE {{!}} WPA2-PSK/WPA3-SAE Mixed Mode
{{!}} WPA-EAP {{!}} WPA2-EAP {{!}} OWE {{#switch:{{{name}}}|RUT241|RUT200|RUT951|RUT956|RUT906 =
{{!}} WPA3-SAE {{!}} OWE; default: {{#switch:{{{name}}}
|#default = {{!}} WPA2-EAP/WPA3-EAP Mixed Mode {{!}} WPA3-EAP}}; default: {{#switch:{{{name}}}
|RUT241|RUT200|RUT951|RUT956|RUT906 = <b>WPA2-PSK/WPA3-SAE Mixed Mode</b>
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = <b>WPA2-PSK/WPA3-SAE Mixed Mode</b>
|#default = <b>WPA2-PSK</b>
|#default = <b>WPA2-PSK</b>
}}</td>
}}</td>
</tr>
</tr>
<tr>
<tr>
<th>WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE</th>
<th>WPA3-SAE, WPA2-PSK/WPA3-SAE Mixed Mode</th>
<th></th>
<th></th>
<th></th>
<th></th>
</tr>
</tr>
<tr>
<tr>
<th>WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP</th>
<th>WPA-EAP, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP</th>
<th></th>
<th></th>
<th></th>
<th></th>
