203
edits
Changes
Template:Networking rutos manual modbus (view source)
Revision as of 09:17, 29 September 2023
, 09:17, 29 September 2023no edit summary
<td>integer [0..65535]; default: <b>none</b></td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Server device's Modbus TCP port.</td>
<td>Server device's Modbus TCP port.</td>
</tr>
</tr>
<tr>
<tr>
<tr>
<tr>
<td>Data type</td>
<td>Data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>Defines how read data will be stored.</td>
<td>Defines how read data will be stored.</td>
</tr>
</tr>
</tr>
</tr>
<tr>
<tr>
<td>Server device</td>
<td>Serial device</td>
<td><i>server device instance</i>; default: <b>none</b></td>
<td><i>serial device instance</i>; default: <b>none</b></td>
<td>Specifies which serial device will be used on this server.</td>
<td>Specifies which serial device will be used on this server.</td>
</tr>
</tr>
<tr>
<tr>
<td>Data type</td>
<td>Data type</td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
<td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
<td>Defines how read data will be stored.</td>
<td>Defines how read data will be stored.</td>
</tr>
</tr>
