7,494
edits
Changes
Template:Networking rutos manual administration (view source)
Revision as of 09:50, 29 September 2023
, 09:50, 29 September 2023no edit summary
<tr>
<tr>
<td>Enable SSH access</td>
<td>Enable SSH access</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Turns SSH access from the local network (LAN) on or off.</td>
<td>Turns SSH access from the local network (LAN) on or off.</td>
</tr>{{#ifeq:{{{series}}}|TAP100||
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Remote SSH access</td>
<td>Remote SSH access</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns SSH access from remote networks (WAN) on or off.</td>
<td>Turns SSH access from remote networks (WAN) on or off.</td>
</tr>}}
</tr>}}
<tr>
<tr>
<td>Enable key-based authentication</td>
<td>Enable key-based authentication</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Use public keys for authentication.</td>
<td>Use public keys for authentication.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable HTTP access</td>
<td>Enable HTTP access</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Turns HTTP access from the local network (LAN) to the device WebUI on or off.</td>
<td>Turns HTTP access from the local network (LAN) to the device WebUI on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable HTTPS access</td>
<td>Enable HTTPS access</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Turns HTTPS access from the local network (LAN) to the device WebUI on or off.</td>
<td>Turns HTTPS access from the local network (LAN) to the device WebUI on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Redirect to HTTPS</td>
<td>Redirect to HTTPS</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Redirects connection attempts from HTTP to HTTPS.</td>
<td>Redirects connection attempts from HTTP to HTTPS.</td>
</tr>{{#ifeq:{{{series}}}|TAP100||
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Enable remote HTTP access</td>
<td>Enable remote HTTP access</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns HTTP access from remote networks (WAN) to the device WebUI on or off.</td>
<td>Turns HTTP access from remote networks (WAN) to the device WebUI on or off.</td>
</tr>}}
</tr>}}
<tr>
<tr>
<td>Enable remote HTTPS access</td>
<td>Enable remote HTTPS access</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns HTTPS access from remote networks (WAN) to the device WebUI on or off.</td>
<td>Turns HTTPS access from remote networks (WAN) to the device WebUI on or off.</td>
</tr>}}
</tr>}}
<tr>
<tr>
<td>Ignore private IPs on public interface</td>
<td>Ignore private IPs on public interface</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Prevent access from private (RFC1918) IPs on an interface if it has an public IP address.</td>
<td>Prevent access from private (RFC1918) IPs on an interface if it has an public IP address.</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Certificate files from device</td>
<td>Certificate files from device</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Choose this option if you want to select certificate files from device. Certificate files can be generated in [[{{{name}}} Administration#Certificates|Certificates]] section.</td>
<td>Choose this option if you want to select certificate files from device. Certificate files can be generated in [[{{{name}}} Administration#Certificates|Certificates]] section.</td>
</tr>}}{{#ifeq:{{{series}}}|TAP100||
</tr>}}{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Enable CLI</td>
<td>Enable CLI</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Turns CLI access from the local network (LAN) on or off.</td>
<td>Turns CLI access from the local network (LAN) on or off.</td>
</tr>{{#ifeq:{{{series}}}|TAP100||
</tr>{{#ifeq:{{{series}}}|TAP100||
<tr>
<tr>
<td>Enable remote CLI</td>
<td>Enable remote CLI</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns CLI access from remote networks (WAN) on or off.</td>
<td>Turns CLI access from remote networks (WAN) on or off.</td>
</tr>}}
</tr>}}
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Enable or disable blocking IP's if they have reached the set amount of failed times.</td>
<td>Enable or disable blocking IP's if they have reached the set amount of failed times.</td>
</tr>
</tr>
<tr>
<tr>
<td>Clean after reboot</td>
<td>Clean after reboot</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>If enabled, blocked loging attempts list will be cleared on device reboot.</td>
<td>If enabled, blocked loging attempts list will be cleared on device reboot.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable MAC blockig</td>
<td>Enable MAC blockig</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>If enabled, MAC adresses wil be blocked.</td>
<td>If enabled, MAC adresses wil be blocked.</td>
</tr>
</tr>
<li>If all is in order you should see a 'Formatting MSD...' message on the screen. This indicates that the MSD is being formatted and detached from the system. This procedure can take up to a couple of minutes and ends with a reboot of the device.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_3.png]]</li>
<li>If all is in order you should see a 'Formatting MSD...' message on the screen. This indicates that the MSD is being formatted and detached from the system. This procedure can take up to a couple of minutes and ends with a reboot of the device.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_3.png]]</li>
<li>Your device's flash memory will be restored to normal once the reboot has finished. In order to check, log in to the WebUI and look to the 'System' widget in the 'Overview' page. Hover your mouse cursor over the 'FLASH' memory indicator; you should see your device's flash memory return to its regular size.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_4.png|border|class=tlt-border]]</li>
<li>Your device's flash memory will be restored to normal once the reboot has finished. In order to check, log in to the WebUI and look to the 'System' widget in the 'Overview' page. Hover your mouse cursor over the 'FLASH' memory indicator; you should see your device's flash memory return to its regular size.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_4.png|border|class=tlt-border]]</li>
</ol>
</ol>|}}
|}}
===SSHFS===
===SSHFS===
