1,312
edits
Changes
→Radius Configuration
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
| name = {{{name}}}
In this section you can enable <b>Jumbo frames</b> and <b>LLDP frame filter</b> services.
In this section you can enable <b>Jumbo frames</b> and <b>LLDP frame filter</b> services.
[[File:Networking_tswos_manual_ports_general.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_general_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>off {{!}} on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enable to stop the forwarding of LLDP frames.</td>
<td>Enable to stop the forwarding of LLDP frames.</td>
</tr>
<tr>
<td>IGMP snooping</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enables IGMP snooping.</td>
</tr>
<tr>
<td>Multicast querier</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enables multicast querier.</td>
</tr>
</tr>
</table>
</table>
You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings:
You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings:
[[File:Networking_tswos_manual_ports_port_security_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]
[[File:Networking tswos manual ports port security port settings settings v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>Accept {{!}} Reject; default: <b>Accept</b></td>
<td>Accept {{!}} Reject; default: <b>Accept</b></td>
<td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td>
<td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td>
</tr>
<tr>
<td>Fallback VLAN</td>
<td>Disabled {{!}} VLAN; default: <b>Disabled</b></td>
<td>Indicates fallback VLAN</td>
</tr>
<tr>
<td>Reject VLAN</td>
<td>Disabled {{!}} VLAN; default: <b>Disabled</b></td>
<td>Indicates reject VLAN</td>
</tr>
<tr>
<td>Accept VLAN</td>
<td>Radius assigned {{!}} vlan1(ID: 1); default: <b>vlan1(ID: 1)</b></td>
<td>Indicates accept VLAN</td>
</tr>
</tr>
</table>
</table>
The RADIUS configuration window should look similar to this:
The RADIUS configuration window should look similar to this:
[[File:Networking_tswos_manual_ports_port_security_radius_configuration.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_port_security_radius_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Address (IPv4/IPv6)</td>
<td>IP address</td>
<td>ip; default: <b>0.0.0.0</b></td>
<td>ip; default: <b>0.0.0.0</b></td>
<td>RADIUS server IP.</td>
<td>RADIUS server IP.</td>
<tr>
<tr>
<td>Authentication port</td>
<td>Authentication port</td>
<td>interger [1.. 65535]; default: <b>1812</b></td>
<td>integer [1.. 65535]; default: <b>1812</b></td>
<td>RADIUS server athentication port.</td>
<td>RADIUS server athentication port.</td>
</tr>
</tr>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: red;">Address (IPv4/IPv6)</span></td>
<td><span style="color: red;">IP address</span></td>
<td>ip; default: <b>none</b></td>
<td>ip; default: <b>none</b></td>
<td>Backup RADIUS server IP.</td>
<td>Backup RADIUS server IP.</td>
<tr>
<tr>
<td><span style="color: red;">Authentication port</span></td>
<td><span style="color: red;">Authentication port</span></td>
<td>interger [1.. 65535]; default: <b>none</b></td>
<td>integer [1.. 65535]; default: <b>none</b></td>
<td>Backup RADIUS server athentication port.</td>
<td>Backup RADIUS server authentication port.</td>
</tr>
</tr>
<tr>
<tr>
