5,796
edits
Changes
Created page with "== TAP200 Login to device == If you need to configure the TAP200 without an internet connection, please refer to the guide in this section. <br> <table> <tr> <t..."
== TAP200 Login to device ==
If you need to configure the TAP200 without an internet connection, please refer to the guide in this section.
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. Ensure the Wireless network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the '''Change adapter settings''' in the left panel, then right-click on Wireless Network Adapter, and select Enable.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Configure_your_computer_step_1.png|right|600 px]]</td>
</tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">2. Right-click on Wireless Network Connection and select Properties. Then select '''Internet Protocol Version 4''' and click Properties.
3. If not selected, check to '''Use the following IP address''' and '''enter 192.168.1.5'''.
4. Click in the '''Subnet mask''' it should get auto-filled with 255.255.255.0. Click OK.
</td><td>[[File:Configure_your_computer_WIndows_TCP_IP_5_v1.jpg|right|500x500px]]</td></tr>
<tr style="border: 1px solid #E8E8E8;">
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">5. Connect to a wireless network by right-clicking on Wireless Network Adapter and selecting Connect.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_3.png|right|600 px]]</td>
</tr>
<tr style="border: 1px solid #E8E8E8;">
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">6. Choose the wireless network TAP200 **** from the list and click Connect. Enter the WiFi password located on the device's label.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_4.png|right|400 px]]</td>
</tr>
</table>
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">7. To enter the router's Web interface (WebUI), type http://192.168.1.3 into the URL field of your Internet browser.<br><br>8. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Login to device 192 168 1 3 v1.png|right|600 px]]</td>
</tr>
</table>
[[Category: TAP200]]
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. To enter the managed switch 's Web interface (WebUI), type http://192.168.1.2 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:WebUI Login to device step v2.png|right|600 px]]</td>
</tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">3. After logging in, you must set a new password for security reasons. You will not be able to interact with the managed switch ’s WebUI until the default password is changed. The new password must consist of a minimum of '''8 characters'''. Requirements: one uppercase letter, one lowercase letter, and one digit.<br>
</td>
</tr>
</table>
If you need to configure the TAP200 without an internet connection, please refer to the guide in this section.
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. Ensure the Wireless network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the '''Change adapter settings''' in the left panel, then right-click on Wireless Network Adapter, and select Enable.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Configure_your_computer_step_1.png|right|600 px]]</td>
</tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">2. Right-click on Wireless Network Connection and select Properties. Then select '''Internet Protocol Version 4''' and click Properties.
3. If not selected, check to '''Use the following IP address''' and '''enter 192.168.1.5'''.
4. Click in the '''Subnet mask''' it should get auto-filled with 255.255.255.0. Click OK.
</td><td>[[File:Configure_your_computer_WIndows_TCP_IP_5_v1.jpg|right|500x500px]]</td></tr>
<tr style="border: 1px solid #E8E8E8;">
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">5. Connect to a wireless network by right-clicking on Wireless Network Adapter and selecting Connect.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_3.png|right|600 px]]</td>
</tr>
<tr style="border: 1px solid #E8E8E8;">
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">6. Choose the wireless network TAP200 **** from the list and click Connect. Enter the WiFi password located on the device's label.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_4.png|right|400 px]]</td>
</tr>
</table>
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">7. To enter the router's Web interface (WebUI), type http://192.168.1.3 into the URL field of your Internet browser.<br><br>8. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Login to device 192 168 1 3 v1.png|right|600 px]]</td>
</tr>
</table>
[[Category: TAP200]]
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. To enter the managed switch 's Web interface (WebUI), type http://192.168.1.2 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:WebUI Login to device step v2.png|right|600 px]]</td>
</tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">3. After logging in, you must set a new password for security reasons. You will not be able to interact with the managed switch ’s WebUI until the default password is changed. The new password must consist of a minimum of '''8 characters'''. Requirements: one uppercase letter, one lowercase letter, and one digit.<br>
</td>
</tr>
</table>
