124
edits
Changes
Created page with " <p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.05.0'''] firmware vers..."
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.05.0'''] firmware version. .</p>
==Introduction==
This article contains instructions on how to extend RUT956 router hotspot network using TAP100 access point.
==Configuration overview and prerequisites==
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.
'''Prerequisites:'''
<ul>
<li> RUT956 </li>
<li> TAP100 </li>
<li> End device (PC, Laptop, Smartphone) </li>
</ul>
For this setup we are going to use RUT956 which LAN IP is 192.168.5.1 and TAP100 which LAN IP is 192.168.5.2
[[File:Topology test test.jpg|border|class=tlt-border]]
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "'''Advanced WebUI'''" mode. You can do that by clicking the "'''Advanced'''" button, which is located at the top-right corner of the WebUI.
[[File:Networking rutos manual webui basic advanced mode 75.gif|border|class=tlt-border]]
==RUT956 configuration==
===Configuring RUT956 LAN interface===
----
Go to '''Network -> LAN''' and press edit button and in pop-up window perform following actions :
<ol>
<li> Enter IPv4 address. </li>
<li>Disable DHCP server </li>
</ol>
[[File:LAN RUT956 TAP100 HOTSPOT.png|border|class=tlt-border]]
----
===Configuring RUT956 HotSpot interface===
----
To configure HotSpot instance on RUT956 router, you should firstly download HotSpot package from device package manager. It can by found by navigating on router WebUI to '''System -> Package Manager -> Packages'''.
