31,703
edits
Changes
→GRE Tunnel
In the example network diagram two distant networks LAN1 and LAN2 are connected.
In the example network diagram two distant networks LAN1 and LAN2 are connected.
To create GRE tunnel the user must know the following parameters:
To create GRE tunnel the user must know the following parameters:
1. Source and destination IP addresses
1. Source and destination IP addresses
2. Tunnel’s local IP address
2. Tunnel’s local IP address
3. Distant network’s IP address and Subnet mask
3. Distant network’s IP address and Subnet mask
To create a new GRE instance, go to the GRE Tunnel tab, type in a name for your new instance in the text field below the GRE Tunnel tab and press the '''Add New''' button next to it.
To create a new GRE instance, go to the GRE Tunnel tab, type in a name for your new instance in the text field below the GRE Tunnel tab and press the '''Add New''' button next to it.
The newly created instance will be disabled and unconfigured. To configure it press the '''Edit''' button located next to it. This action will redirect you to the instance’s GRE Tunnel Configuration window.
[[Image:Services vpn gre tunnel configuration.PNG]]
