Changes

Go to '''Network -> LAN''' and press edit button and in pop-up window perform following actions :

Go to '''Network -> LAN''' and press edit button and in pop-up window perform following actions :

<ol>

<ol>

<li>Enter IPv4 address of your choice, we are using 192.168.5.1 in this case, but you could leave the default one of 192.168.1.1 if you prefer to</li>

<li>Enter selected IPv4 address (You could leave the default one of 192.168.1.1 if you prefer to)</li>

<li>Disable DHCP server </li>

<li>Disable DHCP server </li>

</ol>

</ol>

Next, in the pop-up window, please click the "Enable" button. You can choose to either leave all other settings at their default values or make adjustments as per your preferences. For the purpose of this configuration, we'll maintain the default settings.

Next, in the pop-up window, please click the "Enable" button. You can choose to either leave all other settings at their default values or make adjustments as per your preferences. For the purpose of this configuration, we'll maintain the default settings.

With this configuration in place, the hotspot will be enabled on the LAN interface, allowing it to function both as a wired and wireless network simultaneously.

With this configuration in place, the hotspot will be enabled on the LAN interface, allowing it to function both as a wired and wireless network simultaneously. If wired Hotspot capabilities are not desirable, please navigate to the next section called "disabling Wired Hotspot capabilities", which explains how it could be disabled.

'''IMPORTANT :''' After enabling this hotspot interface, it's important to note that you won't be able to access the router through its IP address, unless you have previously made management port. Another way to access router without management port configurations is through our Teltonika RMS. You can find instructions on how to generate WebUI access link on RMS [https://wiki.teltonika-networks.com/view/How_to_reach_a_router%27s_WebUI_from_RMS%3F here]

'''IMPORTANT :''' After enabling this hotspot interface, it's important to note that you won't be able to access the router through its IP address, unless you have previously made management port. Another way to access router without management port configurations is through our Teltonika RMS. You can find instructions on how to generate WebUI access link on RMS [https://wiki.teltonika-networks.com/view/How_to_reach_a_router%27s_WebUI_from_RMS%3F here]