Changes

Template:Networking rutos manual wireless (view source)

Revision as of 13:37, 26 October 2023

1,019 bytes added ,  13:37, 26 October 2023
no edit summary
Line 51: Line 51:  
{{#switch:{{{name}}}
 
{{#switch:{{{name}}}
 
|TAP100 =
 
|TAP100 =
 +
|TAP200 =
 
|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v3.png|border|class=tlt-border]]
 
|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v3.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v2 mixed.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v2 mixed.png|border|class=tlt-border]]
Line 65: Line 66:  
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
 
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v2.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v2.png|border|class=tlt-border]]
 +
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100.png|border|class=tlt-border]]
 
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]
 
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]
 
}}
 
}}
Line 126: Line 128:  
     <tr>
 
     <tr>
 
         <td>Transmit Power</td>
 
         <td>Transmit Power</td>
−
         <td>[{{#ifeq:{{{series}}}|TAP100|13%|5%}}...100%]; default: <b>100 %</b></td>
+
         <td>[{{#switch:{{{series}}}|TAP100|TAP200=13%|#default=5%}}...100%]; default: <b>100 %</b></td>
 
         <td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>
 
         <td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
     <td>Country code</td>
 
     <td>Country code</td>
−
         <td>country code; default: <b>{{#ifeq:{{{series}}}|TAP100|00 - World|US - United States}}</b></td>
+
         <td>country code; default: <b>{{#switch:{{{series}}}|TAP100|TAP200=00 - World|#default=US - United States}}</b></td>
 
         <td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard.</td>
 
         <td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard.</td>
 
     </tr>
 
     </tr>
Line 142: Line 144:  
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
 
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100.png|border|class=tlt-border]]
 +
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap200.png|border|class=tlt-border]]
 
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v1.png|border|class=tlt-border]]
 
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v1.png|border|class=tlt-border]]
 
}}
 
}}
Line 222: Line 225:  
</table>
 
</table>
   −
{{#ifeq:{{{series}}}|TAP100| |=====WiFi Scanner=====
+
{{#switch:{{{series}}}|TAP100|TAP200= |#default= =====WiFi Scanner=====
 
----
 
----
 
The <b>WiFi Scanner</b> provides you with the possibility to scan and collect information about connected devices and surrounding access points. The collected data is sent using the [[{{{name}}} Data to Server|Data to Server]] functionality with Kinesis argument.
 
The <b>WiFi Scanner</b> provides you with the possibility to scan and collect information about connected devices and surrounding access points. The collected data is sent using the [[{{{name}}} Data to Server|Data to Server]] functionality with Kinesis argument.
 
{{#switch: {{{series}}}
 
{{#switch: {{{series}}}
 
   | #default =
 
   | #default =
−
   | RUT36X|RUT9|TCR1|RUT2|RUT2M|RUT9M =  
+
   | RUT36X|RUT9|TCR1|RUT2|RUT2M|RUT9M = <u><b>Note:</b> WiFi Scanner is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
−
</br></br><u><b>Note:</b> WiFi Scanner is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
   
}}
 
}}
 
[[File:Networking_rutos_manual_wireless_global_settings_wifi_scanner_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutos_manual_wireless_global_settings_wifi_scanner_v1.png|border|class=tlt-border]]
Line 248: Line 250:  
       <td>Interval between scans in seconds.</td>
 
       <td>Interval between scans in seconds.</td>
 
     </tr>
 
     </tr>
−
</table>
+
</table>}}
−
}}
      
====Interface Configuration====
 
====Interface Configuration====
−
 
+
----
−
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#ifeq:{{{series}}}|TAP100|| or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → {{#ifeq:{{{series}}}|TAP100|SSIDs|Wireless}} page:
+
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
 
{{#switch: {{{name}}}
 
{{#switch: {{{name}}}
 
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_v3.png|border|class=tlt-border]]
 
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_v3.png|border|class=tlt-border]]
 
|TCR100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tcr1_v3.png|border|class=tlt-border]]
 
|TCR100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tcr1_v3.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v3.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v3.png|border|class=tlt-border]]
 +
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap200.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless interface configuration edit button mixed v2.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless interface configuration edit button mixed v2.png|border|class=tlt-border]]
 
}}
 
}}
Line 267: Line 269:  
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v2.png|border|class=tlt-border]]
 
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v2.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v2.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v2.png|border|class=tlt-border]]
 +
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200.png|border|class=tlt-border]]
 
}}
 
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 278: Line 281:  
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>Enables or disables WiFi interface.</td>
 
         <td>Enables or disables WiFi interface.</td>
−
     </tr>{{#ifeq:{{{series}}}|TAP100||
+
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <td>Mode</td>
 
         <td>Mode</td>
 
         <td>Client {{!}} Access Point {{!}} Mesh {{!}} Multi AP; default: <b>Access Point</b></td>
 
         <td>Client {{!}} Access Point {{!}} Mesh {{!}} Multi AP; default: <b>Access Point</b></td>
 
         <td>Defines what role this interface will do, Access point to supply WiFi for other devices, Client to use other devices WiFi for WWAN and Mesh to act as mesh network gateway or a node in a mesh network.</td>
 
         <td>Defines what role this interface will do, Access point to supply WiFi for other devices, Client to use other devices WiFi for WWAN and Mesh to act as mesh network gateway or a node in a mesh network.</td>
−
     </tr>}}{{#ifeq:{{{series}}}|TAP100||
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
       <th>Access Point mode</th>
 
       <th>Access Point mode</th>
Line 290: Line 293:  
     </tr>}}
 
     </tr>}}
 
     <tr>
 
     <tr>
−
         <td>{{#ifeq:{{{series}}}|TAP100|SSID|ESSID}}</td>
+
         <td>{{#switch:{{{series}}}|TAP100|TAP200=SSID|#default=ESSID}}</td>
−
         <td>Factory {{#ifeq:{{{series}}}|TAP100|SSID|ESSID}} is different for every device; default: <b></b></td>
+
         <td>Factory {{#switch:{{{series}}}|TAP100|TAP200=SSID|#default=ESSID}} is different for every device; default: <b></b></td>
−
         <td>{{#ifeq:{{{series}}}|TAP100|Service Set Identifier.|Extended Service Set Identifier is a name used to identify access point which is shown when client tries to connect to it.}}</td>
+
         <td>{{#switch:{{{series}}}|TAP100|TAP200=Service Set Identifier.|#default=Extended Service Set Identifier is a name used to identify access point which is shown when client tries to connect to it.}}</td>
−
     </tr>{{#ifeq:{{{series}}}|TAP100||
+
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
 
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
 
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
−
     </tr>}}{{#ifeq:{{{series}}}|TAP100|
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=
 
     <tr>
 
     <tr>
 
       <td>Encryption</td>
 
       <td>Encryption</td>
Line 312: Line 315:  
         <td>integer [1..4094]; default: <b>Default</b></td>
 
         <td>integer [1..4094]; default: <b>Default</b></td>
 
         <td>Choose default or define a network VLAN ID.</td>
 
         <td>Choose default or define a network VLAN ID.</td>
−
     </tr>||}}{{#ifeq:{{{series}}}|TAP100||
+
     </tr>|#default=}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <td>Network</td>
 
         <td>Network</td>
 
         <td>network interfaces; default: <b>lan</b></td>
 
         <td>network interfaces; default: <b>lan</b></td>
 
         <td>Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.</td>
 
         <td>Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.</td>
−
     </tr>}}{{#ifeq:{{{series}}}|TAP100||
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <td>Hide ESSID</td>
 
         <td>Hide ESSID</td>
Line 332: Line 335:  
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Enables fast roaming among access points that belong to the same Mobility Domain  </td>
 
         <td>Enables fast roaming among access points that belong to the same Mobility Domain  </td>
−
     </tr>{{#ifeq:{{{series}}}|TAP100||
+
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
       <th>Client mode</th>
 
       <th>Client mode</th>
Line 357: Line 360:  
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
−
     </tr>}}{{#ifeq:{{{series}}}|TAP100||
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <th>Mesh mode</th>
 
         <th>Mesh mode</th>
Line 377: Line 380:  
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
−
     </tr>}}{{#ifeq:{{{series}}}|TAP100||
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <th>Multi AP</th>
 
         <th>Multi AP</th>
Line 400: Line 403:  
</table>
 
</table>
   −
{{#ifeq:{{{series}}}|TAP100||=====Wireless Security=====
+
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
 
----
 
----
 
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
 
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
Line 527: Line 530:  
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
 
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100.png|border|class=tlt-border]]
 +
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200.png|border|class=tlt-border]]
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point.png|border|class=tlt-border]]}}
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point.png|border|class=tlt-border]]}}
   Line 579: Line 583:  
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 
         <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
−
     </tr>{{#ifeq:{{{series}}}|TAP100||
+
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
 
         <td>WDS</td>
 
         <td>WDS</td>
Line 589: Line 593:  
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>Wi-Fi Multimedia (WMM), previously known as Wireless Multimedia Extensions (WME), is a subset of the 802.11e wireless LAN (WLAN) specification that enhances quality of service (QoS) on a network by prioritizing data packets according to four categories. </td>
 
         <td>Wi-Fi Multimedia (WMM), previously known as Wireless Multimedia Extensions (WME), is a subset of the 802.11e wireless LAN (WLAN) specification that enhances quality of service (QoS) on a network by prioritizing data packets according to four categories. </td>
−
     </tr>{{#ifeq:{{{series}}}|TAP100|
+
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=
 
     <tr>
 
     <tr>
 
         <td>Hide SSID</td>
 
         <td>Hide SSID</td>
 
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Hide Service Set Identifier.</td>
 
         <td>Hide Service Set Identifier.</td>
−
     </tr>||}}
+
     </tr>|#default=}}
 
</table>
 
</table>
   −
{{#switch:{{{series}}}|TAP100 =
+
{{#switch:{{{series}}}|TAP100|TAP200 =
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap.png|border|class=tlt-border]]
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 657: Line 661:  
</table>}}
 
</table>}}
   −
{{#switch:{{{series}}}|TAP100 =
+
{{#switch:{{{series}}}|TAP100|TAP200 =
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings mesh.png|border|class=tlt-border]]
 
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings mesh.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 756: Line 760:  
  </table>
 
  </table>
   −
{{#ifeq:{{{series}}}|TAP100||=====Fast Roaming=====
+
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Fast Roaming=====
 
----
 
----
 
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
 
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
Line 795: Line 799:  
</table>}}
 
</table>}}
   −
{{#ifeq:{{{series}}}|TAP100||
+
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
===Configuration examples===
 
===Configuration examples===
 
----
 
----
Line 927: Line 931:  
[[File:Networking_rutos_manual_wireless_qr_code.png|border|class=tlt-border]]
 
[[File:Networking_rutos_manual_wireless_qr_code.png|border|class=tlt-border]]
   −
==Relay Configuration==
+
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
    
The <b>Relay Configuration</b> section is used to relay and dynamically redirect incoming connections to a target host. Its main purpose is extending the wireless network. For example, when the device is in Wireless Station (client) mode, it can be used to bridge WAN and LAN interfaces to create a larger wireless network.<br>You can find a detailed usage example <b>[[Relayd|here]]</b>.
 
The <b>Relay Configuration</b> section is used to relay and dynamically redirect incoming connections to a target host. Its main purpose is extending the wireless network. For example, when the device is in Wireless Station (client) mode, it can be used to bridge WAN and LAN interfaces to create a larger wireless network.<br>You can find a detailed usage example <b>[[Relayd|here]]</b>.
Line 961: Line 965:  
         <td>Wireless interface associated with the relay configuration.</td>
 
         <td>Wireless interface associated with the relay configuration.</td>
 
     </tr>
 
     </tr>
−
</table>
+
</table>}}
    
[[Category:{{{name}}} Network section]]
 
[[Category:{{{name}}} Network section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/115645"

Navigation menu