Changes

{{#switch: {{{series}}}

{{#switch: {{{series}}}

   | RUTX | RUTM = <u><b>Note:</b> For SQM to properly work "Software flow offloading" needs to be turned off on this device. This can be done in <b>Network → [[{{{name}}} Firewall|Routing/NAT Offloading]]</b> settings.</u>

   | RUTX | RUTM = <u><b>Note:</b> For SQM to properly work "Software flow offloading" needs to be turned off on this device. This can be done in <b>Network → [[{{{name}}} Firewall#Routing.2FNAT_Offloading|Routing/NAT Offloading]]</b> settings.</u>

   | #default =  

   | #default =  

<u><b>Note:</b> SQM is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>

<u><b>Note:</b> SQM is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>

       <td>Interface name</td>

       <td>Interface name</td>

       <td>network interface; default: <b>br-lan (lan)</b></td>

       <td>network interface; default: <b>br-lan (lan)</b></td>

       <td>Selects to which interface this SQM configuration will apply. <b>Additional note:</b> consider reading the [[{{{name}}}__QoS#Additional_notes|Additional notes]] section before limiting speeds on selected interfaces.</td>

       <td>Selects to which interface this SQM configuration will apply. <b>Additional note:</b> consider reading the [[{{{name}}}_QoS#Additional_notes|Additional notes]] section before limiting speeds on selected interfaces.</td>

     </tr>

     </tr>

     <tr>

     <tr>