RUTX11 Firmware Downloads: Difference between revisions

RUTX11 Firmware Downloads (view source)

Revision as of 15:39, 21 December 2023

7,922 bytes added , 21 December 2023

no edit summary

VisualWikitext

Vainius.l

Administrators

12,744

edits

@@ Line 6: / Line 6: @@
 ==Changelog==
+===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6/RUTX/RUTX_R_00.07.06_WEBUI.bin RUTX_R_00.07.06]</span></b> | 2023.12.20===
+ * <b>New</b>
+** <b>Network</b>
+*** Enabled IPv6 by default for mobile interfaces
+*** Added operator blacklisting and whitelisting based on mobile country code
+*** Added SIM card not inserted event in Events Log
+*** Added 802.11v BSS Transition Management and 802.11k Radio Resource Measurement
+** <b>Services</b>
+*** Added OPC UA Server
+*** Added the ability to set port for TACACS+ in PAM service
+*** Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
+*** Added new alarm action "Ubus event" in Modbus Client services
+*** Added new input "Modbus alarms" in Data to Server service
+*** Added wget ping subtype support in Events Reporting service
+*** Added new I/O SNMP OID that returns numeric I/O state
+*** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
+*** Added TLS support for OverIP serial functionality
+** <b>WebUI</b>
+*** Added Tailscale VPN support
+*** Renewed user interface design
+*** Added network interface name change functionality
+*** Added last resort configuration option for multiwan policy rules
+*** Added indication when new modem firmware is available
+*** Added mobile connection establishment display in mobile status page
+*** Added default value for "Reset threshold" field in Low Signal Reconnect feature
+** <b>System</b>
+*** Added ability to enable/disable SSH access for specific users in System Users
+*** API support
+* <b>Improvements</b>
+** <b>Network</b>
+*** Disabled operator scan when SIM card is not inserted
+*** Updated carrier aggregation value to be shown as active/inactive
+*** Changed default MTU to 1500 for Mobile interfaces
+*** Added two radio support on one SSID in Wireless
+** <b>Services</b>
+*** Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
+*** Added PKCS#12 certificate container authentication method in IPsec VPN
+*** Added TLV message_payload support for SNMP service
+*** Added Purple.ai configuration profile
+*** Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
+*** Added possibility to assign mobile interface in SQM service
+*** Added reboot on storage device disappearance and re-appearance
+*** Added additional anonymous phone number validation in Mobile Utilities service
+*** Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
+** <b>WebUI</b>
+*** Improved Events Log page loading by adding asynchronous pagination
+*** Removed requirement for Diffie-Hellman parameters in OpenVPN service
+*** Added improvements for creating OpenVPN IPv6 configurations
+*** Added auto redirect after changing router's IP address or port
+*** Added "Interface" dropdown for interfaces selection in Wake on LAN service
+*** Increased Data to Server service MQTT topic length limit to 65535 characters
+*** Added OSPF external routes section to Status page
+*** Moved device menu entry “Reboot” to header menu
+*** Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
+*** Updated Operator state field to show if modem is in limited service
+*** Combined Mobile Usage day, week, month and total pages into one
+*** Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
+*** Added message when SIM card requires PIN/PUK code in Status -> Mobile page
+vMoved WiFi scanner page to Services section
+** <b>System</b>
+*** Added Mosquitto CVE patch 2023-28366
+*** Added Mosquitto CVE patch 2023-3592
+*** Updated hostapd version to 2023-09-08
+*** Updated cURL version to 8.4.0
+*** Updated kernel version to 5.10.199
+*** Updated Mac80211 version to 6.1.24
+*** Added RMS data display to generated troubleshoot
+*** Added downloaded Package Manager packages list to generated troubleshoot
+*** Added process activity load list to generated troubleshoot
+*** Changed default OPKG feed to use Teltonika's URL
+* <b>Fix</b>
+** <b>Network</b>
+*** Fixed DMVPN firewall rule creation issues
+*** Fixed RUTX VLAN keep settings issue when WAN port configuration are overwritten with 1st vlan
+*** Fixed Failover missing active rules when using multiple source and destination IP addresses
+*** Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
+*** Fixed an issue with Manual APN connection making attempts too rapidly
+*** Fixed deny data roaming functionality when transitioning between roaming and home operator network
+*** Fixed network disconnection on mobile network detach and DHCP lease loss situations
+*** Fixed VoLTE configuration after modem reboot
+*** Fixed Mobile interface bridge and passthrough mode connectivity loss
+*** Fixed an issue where rarely PIN code would get removed after SIM switch
+*** Fixed mobile operator list being not updated after changes in WebUI
+*** Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
+*** Fixed unstable Wireless mesh connection
+*** Fixed low Wireless mesh throughput
+*** Fixed concurrent Wireless STA and AP functionality on 5 GHz band
+** <b>Services</b>
+*** Fixed SSH module enable in PAM service
+*** Added minimum free space check when saving logs to flash in Logging service
+*** Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
+*** Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
+*** Fixed VRRP instances advertising wrong virtual IPs
+*** Added Hotspot information in SNMP MIB file
+*** Fixed registered Hotspot Local Users showing random username
+*** Fixed selection of MAC Auth for LAN interfaces in Hotspot service
+*** Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
+*** Fixed instance shutdown after last local user deletion
+*** Fixed Cumulocity app not sending any telemetry data
+*** Fixed Call Utilities failure when caller id is hidden during a call
+*** Fixed AVL with poor mobile connections
+*** Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
+*** Fixed serial timeout not working in Over IP serial functionality
+*** Removed "Echo" option in Modbus TCP over Serial functionality
+*** Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
+*** Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
+** <b>WebUI</b>
+*** Fixed side menu style issues when Japanese language is used
+*** Fixed displaying of vendor names in Topology page
+*** Fixed language packs being selectable when still in Package Manager queue
+*** Added ability to configure IPv6 BGP peer
+*** Fixed RelayD configuration issues after keep settings
+*** Fixed realtime graphs responsive design issues
+*** Fixed Network Shares users deletion
+*** Fixed not all LAN interfaces shown in dropdown in Hotspot service page
+*** Fixed modem updater legacy firmware flashing
+*** Fixed wireless realtime data to show signal as unavailable with no connected clients
+*** Fixed WiFi scanner disconnecting AP users
+*** Fixed setup wizard errors in Wireless configuration page
+** <b>System</b>
+*** Patched FRR CVE-2023-38406
+*** Patched FRR CVE-2023-38407
+*** Patched FRR CVE-2023-41358
+*** Patched FRR CVE-2023-41360
+*** Patched FRR CVE-2023-41909
+*** Patched FRR CVE-2023-47234
+*** Patched FRR CVE-2023-47235
+*** Patched OpenSSL CVE-2023-3446
+*** Patched OpenSSL CVE-2023-3817
+*** Patched LibXML2 CVE-2023-39615
+*** Patched LibXML2 CVE-2023-45322
+*** Patched FFMPEG CVE-2021-28429
+*** Patched FFMPEG CVE-2022-48434
+*** Patched dnsmasq CVE-2023-28450
+*** Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot
+*** Fixed WebUI access after upgrading from legacy RutOS version
 ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/RUTX/RUTX_R_00.07.05.4_WEBUI.bin RUTX_R_00.07.05.4]</span></b> | 2023.11.09===