8,823
edits
Changes
Template:Networking rutos manual profiles rut2 rut9 (view source)
Revision as of 08:22, 9 April 2024
, 9 AprilCreated page with "===Summary=== Configuration <b>profiles</b> provide a way to create multiple distinct device configuration sets and apply them to the device based on current user requirement..."
===Summary===
Configuration <b>profiles</b> provide a way to create multiple distinct device configuration sets and apply them to the device based on current user requirements. This chapter is an overview of the Profiles page in {{{name}}} devices.
===Configuration Profiles===
This section displays user defined <b>configuration profiles</b>:
[[File:Networking_rutos_manual_profiles_configuration_profiles_v2.png]]
----
To create a new profile, configure the device in accordance with your needs, go to this page, enter a custom name for the profile and click the 'Add' button. You can also choose to create a profile without any previous configurations. A new profile with the given name will appear in the "configuration profiles" list:
[[File:Networking_rutos_manual_profiles_configuration_profiles_add_new_profile_v2.png|border|class=tlt-border]]
The 'Apply' button applies the adjacent configuration on the device.
===Scheduler===
The <b>Profile Scheduler</b> provides a possibility to set up a schedule of when the device
should use one profile configuration or another.
Check [[#Profile Scheduler Instance Example|Profile Scheduler Instance Example]] to get a better understanding at how Profile Scheduler Instances works.
====General Configuration====
----
The <b>General Configuration</b> section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on.
[[File:Networking_rutos_manual_profiles_scheduler_general_configuration.png|border|class=tlt-border]]
====Profile Scheduler Instances====
----
The <b>Profile Scheduler Instances</b> section allows you to create profile Instances
to be enabled during specific time intervals. To add a new Instance click <b>Add</b> button.
<b>Note:</b> new Instance can only be created if there is at least one custom [[#Profiles|profile]] created.
[[File:Networking_rutos_manual_profiles_scheduler_profile_scheduler_instances.png|border|class=tlt-border]]
=====Profile Scheduler Instance Configuration=====
----
This page is used to configure profile, time and day of selected scheduler instance. Refer to the figure and table below for information on the Profile Scheduler Instance Configuration fields:
[[File:Networking_rutos_manual_profiles_scheduler_profile_scheduler_instance_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Enable selected instance for scheduler.</td>
</tr>
<tr>
<td>Profile</td>
<td>profiles; default: <b>none</b></td>
<td>Select profile which will be applied during specified time interval.</td>
</tr>
<tr>
<td>Interval Type</td>
<td>Weekdays | Month Days; default: <b>Weekdays</b></td>
<td>Depending on your needs select whether you want to configure weekdays or specific month days.</td>
</tr>
<tr>
<td>Start Time</td>
<td>time; default: <b>12:00</b></td>
<td>Enter time of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Time</td>
<td>time; default: <b>12:00</b></td>
<td>Enter time of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<th>Interval Type: Weekdays</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Start Day</td>
<td>Weekday [Monday..Sunday]; default: <b>Sunday</b></td>
<td>Select a day of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Day</td>
<td>Weekday [Monday..Sunday]; default: <b>Sunday</b></td>
<td>Select a day of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<th>Interval Type: Month Days</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Start Day</td>
<td>Day of month [1..31]; default: <b>1</b></td>
<td>Select a day of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Day</td>
<td>Day of month [1..31]; default: <b>1</b></td>
<td>Select a day of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<td>Force last day</td>
<td>off | on; default: <b>off</b></td>
<td>Force intervals to accept last day of month as valid option if selected day doesn't exist in ongoing month.</td>
</tr>
</table>
=====Profile Scheduler Instance Example=====
----
Scheduler will use <i>profile instance</i> if it is enabled <b>and</b> it's time
interval matches device's [[{{{name}}}_Administration#General_2|date]], otherwise <i>default</i> profile will be used.
Example - we have 3 profiles in total:
<ul>
<li>default</li>
<li>Profile A</li>
<li>Profile B</li>
</ul>
We create profile instances for Profiles A and B:
<ul>
<li>Profile A: 08:00 - 11:00</li>
<li>Profile B: 13:00 - 20:00</li>
</ul>
During 11:00 - 13:00 and 20:00 - 08:00 <i>default</i> profile will be used.
Configuration <b>profiles</b> provide a way to create multiple distinct device configuration sets and apply them to the device based on current user requirements. This chapter is an overview of the Profiles page in {{{name}}} devices.
===Configuration Profiles===
This section displays user defined <b>configuration profiles</b>:
[[File:Networking_rutos_manual_profiles_configuration_profiles_v2.png]]
----
To create a new profile, configure the device in accordance with your needs, go to this page, enter a custom name for the profile and click the 'Add' button. You can also choose to create a profile without any previous configurations. A new profile with the given name will appear in the "configuration profiles" list:
[[File:Networking_rutos_manual_profiles_configuration_profiles_add_new_profile_v2.png|border|class=tlt-border]]
The 'Apply' button applies the adjacent configuration on the device.
===Scheduler===
The <b>Profile Scheduler</b> provides a possibility to set up a schedule of when the device
should use one profile configuration or another.
Check [[#Profile Scheduler Instance Example|Profile Scheduler Instance Example]] to get a better understanding at how Profile Scheduler Instances works.
====General Configuration====
----
The <b>General Configuration</b> section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on.
[[File:Networking_rutos_manual_profiles_scheduler_general_configuration.png|border|class=tlt-border]]
====Profile Scheduler Instances====
----
The <b>Profile Scheduler Instances</b> section allows you to create profile Instances
to be enabled during specific time intervals. To add a new Instance click <b>Add</b> button.
<b>Note:</b> new Instance can only be created if there is at least one custom [[#Profiles|profile]] created.
[[File:Networking_rutos_manual_profiles_scheduler_profile_scheduler_instances.png|border|class=tlt-border]]
=====Profile Scheduler Instance Configuration=====
----
This page is used to configure profile, time and day of selected scheduler instance. Refer to the figure and table below for information on the Profile Scheduler Instance Configuration fields:
[[File:Networking_rutos_manual_profiles_scheduler_profile_scheduler_instance_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Enable selected instance for scheduler.</td>
</tr>
<tr>
<td>Profile</td>
<td>profiles; default: <b>none</b></td>
<td>Select profile which will be applied during specified time interval.</td>
</tr>
<tr>
<td>Interval Type</td>
<td>Weekdays | Month Days; default: <b>Weekdays</b></td>
<td>Depending on your needs select whether you want to configure weekdays or specific month days.</td>
</tr>
<tr>
<td>Start Time</td>
<td>time; default: <b>12:00</b></td>
<td>Enter time of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Time</td>
<td>time; default: <b>12:00</b></td>
<td>Enter time of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<th>Interval Type: Weekdays</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Start Day</td>
<td>Weekday [Monday..Sunday]; default: <b>Sunday</b></td>
<td>Select a day of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Day</td>
<td>Weekday [Monday..Sunday]; default: <b>Sunday</b></td>
<td>Select a day of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<th>Interval Type: Month Days</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Start Day</td>
<td>Day of month [1..31]; default: <b>1</b></td>
<td>Select a day of the start of interval in which scheduler will switch profiles.</td>
</tr>
<tr>
<td>End Day</td>
<td>Day of month [1..31]; default: <b>1</b></td>
<td>Select a day of the end of interval in which scheduler will switch profiles back.</td>
</tr>
<tr>
<td>Force last day</td>
<td>off | on; default: <b>off</b></td>
<td>Force intervals to accept last day of month as valid option if selected day doesn't exist in ongoing month.</td>
</tr>
</table>
=====Profile Scheduler Instance Example=====
----
Scheduler will use <i>profile instance</i> if it is enabled <b>and</b> it's time
interval matches device's [[{{{name}}}_Administration#General_2|date]], otherwise <i>default</i> profile will be used.
Example - we have 3 profiles in total:
<ul>
<li>default</li>
<li>Profile A</li>
<li>Profile B</li>
</ul>
We create profile instances for Profiles A and B:
<ul>
<li>Profile A: 08:00 - 11:00</li>
<li>Profile B: 13:00 - 20:00</li>
</ul>
During 11:00 - 13:00 and 20:00 - 08:00 <i>default</i> profile will be used.
