Jump to content
  • EN

Template:Networking rutos manual vpn: Difference between revisions

Template:Networking rutos manual vpn (view source)

Revision as of 10:33, 22 July 2024

4,157 bytes added ,  22 July
→‎GRE: Main & Tunnel Settings
VisualWikitext
No edit summary
(21 intermediate revisions by 3 users not shown)
Line 73: Line 73:
     <tr>
     <tr>
       <td>Enable OpenVPN config from file</td>
       <td>Enable OpenVPN config from file</td>
       <td>off {{!}} <span style="color:#ffce33 ;">on</span>; default: <b>off</b></td>
       <td>off {{!}} <span style="color:#8B4513;">on</span>; default: <b>off</b></td>
       <td>Enables or disables custom OpenVPN config from file.</td>
       <td>Enables or disables custom OpenVPN config from file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color:#ffce33 ;">OpenVPN configuration file</span></td>
       <td><span style="color:#8B4513;">OpenVPN configuration file</span></td>
       <td>-(interactive button)</td>
       <td>-(interactive button)</td>
       <td>Upload OpenVPN configuration. Warning! This will overwrite your current configuration.</td>
       <td>Upload OpenVPN configuration. Warning! This will overwrite your current configuration.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color:#ffce33 ;">Upload OpenVPN authentications files</span></td>
       <td><span style="color:#8B4513;">Upload OpenVPN authentications files</span></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Upload OpenVPN authentication files, which will be automatically included in configuration.</td>
       <td>Upload OpenVPN authentication files, which will be automatically included in configuration.</td>
Line 88: Line 88:
     <tr>
     <tr>
       <td>TUN/TAP</td>
       <td>TUN/TAP</td>
       <td>TUN (tunnel) {{!}} TAP (bridged); default: <b>TUN (tunnel)</b></td>
       <td>TUN (tunnel) {{!}} <span style="color:brown ;">TAP (bridged)</span>; default: <b>TUN (tunnel)</b></td>
       <td>Virtual network device type.
       <td>Virtual network device type.
             <ul>
             <ul>
Line 95: Line 95:
             </ul>
             </ul>
         </td>
         </td>
    </tr>
    <tr>
      <td><span style="color:brown ;">Bridge</span></td>
      <td>Bridge interface for TAP; default: br-lan</td>
      <td>Assign a TAP interface to a bridge.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 140: Line 145:
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS:</span> TLS cipher</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>: TLS cipher</td>
         <td>All {{!}} DHE+RSA {{!}} Custom; default: <b>All</b></td>
         <td>All {{!}} <span style="color: pink;">DHE+RSA</span> {{!}} <span style="color: pink;">Custom</span>; default: <b>All</b></td>
         <td>Packet encryption algorithm cipher.</td>
         <td>Packet encryption algorithm cipher.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS:</span> Allowed TLS ciphers</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>:<span style="color: pink;"> Allowed TLS ciphers</span></td>
         <td>All {{!}} DHE+RSA {{!}} Custom; default: <b>All</b></td>
         <td>Custom {{!}} TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 {{!}} TLS-DHE-RSA-WITH-AES-256-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 {{!}} TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA {{!}} TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 {{!}} TLS-DHE-RSA-WITH-AES-128-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 {{!}} TLS-DHE-RSA-WITH-SEED-CBC-SHA {{!}} TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA {{!}} TLS-DHE-RSA-WITH-DES-CBC-SHA; default: <b>All</b></td>
         <td>A list of TLS ciphers accepted by this connection.</td>
         <td>Specific cyphers to use. Only 6 can be selected at a time.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 200: Line 205:
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span>Use PKCS #12 format</td>
         <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password:</span>Use PKCS #12 format</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turn PKCS #12 format on or off.</td>
         <td>Turn PKCS #12 format on or off.</td>
Line 215: Line 220:
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span> HMAC authentication algorithm</td>
     <td>Authentication algorithm</td>
         <td>none {{!}} SHA1 {{!}} SHA256 {{!}} SHA384 {{!}} SHA512; default: <b>SHA1</b></td>
         <td>none {{!}} MD5 {{!}} SHA1 {{!}} SHA256 {{!}} SHA384 {{!}} SHA512; default: <b>SHA1</b></td>
         <td>HMAC authentication algorithm type.</td>
         <td>HMAC authentication algorithm type.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span>Additional HMAC authentication</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password:</span>Additional HMAC authentication</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>An additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.</td>
       <td>An additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span> HMAC authentication key</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password:</span> HMAC authentication key</td>
       <td>.key file; default: <b>none</b></td>
       <td>.key file; default: <b>none</b></td>
       <td>Uploads an HMAC authentication key file.</td>
       <td>Uploads an HMAC authentication key file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span> HMAC key direction</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password:</span> HMAC key direction</td>
       <td>0 {{!}} 1 {{!}} none; default: <b>1</b></td>
       <td>0 {{!}} 1 {{!}} none; default: <b>1</b></td>
       <td>The value of the key direction parameter should be complementary on either side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogether.</td>
       <td>The value of the key direction parameter should be complementary on either side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogether.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">Password:</span> Certificate authority</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password:</span> Certificate authority</td>
       <td>.ca file; default: <b>none</b></td>
       <td>.ca file; default: <b>none</b></td>
       <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.</td>
       <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS:</span> Client certificate</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>: Client certificate</td>
         <td>.crt file; default: <b>none</b></td>
         <td>.crt file; default: <b>none</b></td>
         <td>Client certificate is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. Client certificates play a key role in many mutual authentication designs, providing strong assurances of a requester's identity.</td>
         <td>Client certificate is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. Client certificates play a key role in many mutual authentication designs, providing strong assurances of a requester's identity.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS:</span> Client key</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>:Client key</td>
         <td>.key file; default: <b>none</b></td>
         <td>.key file; default: <b>none</b></td>
         <td>Authenticates the client to the server and establishes precisely who they are.</td>
         <td>Authenticates the client to the server and establishes precisely who they are.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS:</span> Private key decryption password (optional)</td>
     <td><span style="color: red;">TLS</span>/<span style="color: SaddleBrown;">Config File</span>: Private key decryption password (optional)</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>A password used to decrypt the server's private key. Use only if server's .key file is encrypted with a password.</td>
         <td>A password used to decrypt the server's private key. Use only if server's .key file is encrypted with a password.</td>
Line 266: Line 271:
         <ul>
         <ul>
             <li>Red for <span style="color: red;">Authentication: TLS</span></li>
             <li>Red for <span style="color: red;">Authentication: TLS</span></li>
            <li>Olive for <span style="color: olive;">Authentication: TLS/Password</span></li>
             <li>Purple for <span style="color: purple;">Authentication: Static key</span></li>
             <li>Purple for <span style="color: purple;">Authentication: Static key</span></li>
             <li>Blue for <span style="color: #0054a6;">Authentication: Password</span></li>
             <li>Blue for <span style="color: #0054a6;">Authentication: Password</span></li>
            <li>Brown for <span style="color: #8B4513;">OpenVPN config from file</span></li>
         </ul>
         </ul>
     </li>
     </li>
Line 281: Line 288:
To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the OpenVPN server's configuration fields:
To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the OpenVPN server's configuration fields:


[[File:Networking_rutx_vpn_openvpn_server_configuration_v3.png|border|class=tlt-border]]
[[File:Networking_rutx_vpn_openvpn_server_configuration_v4.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 293: Line 300:
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns the OpenVPN instance on or off.</td>
       <td>Turns the OpenVPN instance on or off.</td>
    </tr>
<tr>
      <td>Enable OpenVPN config from file</td>
      <td>off {{!}} <span style="color:#8B4513;">on</span>; default: <b>off</b></td>
      <td>Enables or disables custom OpenVPN config from file.</td>
    </tr>
    <tr>
      <td><span style="color:#8B4513;">OpenVPN configuration file</span></td>
      <td>-(interactive button)</td>
      <td>Upload OpenVPN configuration. Warning! This will overwrite your current configuration.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable OpenVPN config from file</td>
       <td><span style="color:#8B4513;">Upload OpenVPN authentications files</span></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Enables or disables custom OpenVPN config from file.</td>
       <td>Upload OpenVPN authentication files, which will be automatically included in configuration.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>TUN/TAP</td>
       <td>TUN/TAP</td>
       <td>TUN (tunnel) {{!}} TAP (bridged); default: <b>TUN (tunnel)</b></td>
       <td>TUN (tunnel) {{!}} <span style="color:brown ;">TAP (bridged)</span>; default: <b>TUN (tunnel)</b></td>
       <td>Virtual network device type.
       <td>Virtual network device type.
             <ul>
             <ul>
Line 308: Line 325:
             </ul>
             </ul>
         </td>
         </td>
    </tr>
    <tr>
      <td><span style="color:brown ;">Bridge</span></td>
      <td>Bridge interface for TAP; default: br-lan</td>
      <td>Assign a TAP interface to a bridge.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 329: Line 351:
       <td>Turns LZO data compression on or off.</td>
       <td>Turns LZO data compression on or off.</td>
     </tr>
     </tr>
    <tr>
        <tr>
      <td>Encryption</td>
      <td>DES-CBC 64 {{!}} RC2-CBC 128 {{!}} DES-EDE-CBC 128 {{!}} DES-EDE3-CBC 192 {{!}} DESX-CBC 192 {{!}} BF-CBC 128 {{!}} RC2-40-CBC 40 {{!}} CAST5-CBC 128 {{!}} RC2-64CBC 64 {{!}} AES-128-CBC 128 {{!}} AES-128-CFB 128 {{!}} AES-128-CFB1 128 {{!}} AES-128-CFB8 128 {{!}} AES-128-OFB 128 {{!}} AES-128-GCM 128 {{!}} AES-192-CBC 192 {{!}} AES-192-CFB 192 {{!}} AES-192-CFB1 192 {{!}} AES-192-CFB8 192 {{!}} AES-192-OFB 192 {{!}} AES-192-GCM 192 {{!}} AES-256-CBC 256 {{!}} AES-256-CFB 256 {{!}} AES-256-CFB1 256 {{!}} AES-256-CFB8 256 {{!}} AES-256-OFB 256 {{!}} AES-256-GCM 256 {{!}} none; default: <b>AES-256-CBC 256</b></td>
      <td>Algorithm used for packet encryption.</td>
    </tr>
    <tr>
     <td>Authentication</td>
     <td>Authentication</td>
         <td>TLS {{!}} Static Key {{!}} TLS/Password; default: <b>TLS</b></td>
         <td>TLS {{!}} Static Key {{!}} TLS/Password; default: <b>TLS</b></td>
Line 350: Line 367:
             </ul>
             </ul>
         </td>
         </td>
    </tr>
    <tr>
      <td>Encryption</td>
      <td>DES-CBC 64 {{!}} RC2-CBC 128 {{!}} DES-EDE-CBC 128 {{!}} DES-EDE3-CBC 192 {{!}} DESX-CBC 192 {{!}} BF-CBC 128 {{!}} RC2-40-CBC 40 {{!}} CAST5-CBC 128 {{!}} RC2-64CBC 64 {{!}} AES-128-CBC 128 {{!}} AES-128-CFB 128 {{!}} AES-128-CFB1 128 {{!}} AES-128-CFB8 128 {{!}} AES-128-OFB 128 {{!}} AES-128-GCM 128 {{!}} AES-192-CBC 192 {{!}} AES-192-CFB 192 {{!}} AES-192-CFB1 192 {{!}} AES-192-CFB8 192 {{!}} AES-192-OFB 192 {{!}} AES-192-GCM 192 {{!}} AES-256-CBC 256 {{!}} AES-256-CFB 256 {{!}} AES-256-CFB1 256 {{!}} AES-256-CFB8 256 {{!}} AES-256-OFB 256 {{!}} AES-256-GCM 256 {{!}} none; default: <b>AES-256-CBC 256</b></td>
      <td>Algorithm used for packet encryption.</td>
    </tr>
    <tr>
    <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>: TLS cipher</td>
        <td>All {{!}} <span style="color: pink;">DHE+RSA</span> {{!}} <span style="color: pink;">Custom</span>; default: <b>All</b></td>
        <td>Packet encryption algorithm cipher.</td>
    </tr>
    <tr>
    <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>:<span style="color: pink;"> Allowed TLS ciphers</span></td>
        <td>Custom {{!}} TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 {{!}} TLS-DHE-RSA-WITH-AES-256-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 {{!}} TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA {{!}} TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 {{!}} TLS-DHE-RSA-WITH-AES-128-CBC-SHA {{!}} TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 {{!}} TLS-DHE-RSA-WITH-SEED-CBC-SHA {{!}} TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA {{!}} TLS-DHE-RSA-WITH-DES-CBC-SHA; default: <b>All</b></td>
        <td>Specific cyphers to use. Only 6 can be selected at a time.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 377: Line 409:
     </tr>
     </tr>
     <tr>
     <tr>
    <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> TLS cipher</td>
      <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Client to client</td>
        <td>All {{!}} DHE+RSA {{!}} Custom; default: <b>All</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
        <td>Packet encryption algorithm cipher.</td>
    </tr>
    <tr>
    <td><span style="color: red;">TLS/Password:</span> Allowed TLS ciphers</td>
        <td>All {{!}} DHE+RSA {{!}} Custom; default: <b>All</b></td>
        <td>A list of TLS ciphers accepted by this connection.</td>
    </tr>
    <tr>
      <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Client to client</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Allows OpenVPN clients to communicate with each other on the VPN network.</td>
       <td>Allows OpenVPN clients to communicate with each other on the VPN network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Keep alive</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Keep alive</td>
         <td>two integers separated by a space; default: <b>none</b></td>
         <td>two integers separated by a space; default: <b>none</b></td>
         <td>Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specifiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.<br><b>Example</b>: <i>10 120</i></td>
         <td>Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specifiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.<br><b>Example</b>: <i>10 120</i></td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Virtual network IP address</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Virtual network IP address</td>
         <td>ip4; default: <b>none</b></td>
         <td>ip4; default: <b>none</b></td>
         <td>IPv4 address of the OpenVPN network.</td>
         <td>IPv4 address of the OpenVPN network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Virtual network netmask</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Virtual network netmask</td>
         <td>netmask; default: <b>none</b></td>
         <td>netmask; default: <b>none</b></td>
         <td>Subnet mask of the OpenVPN network.</td>
         <td>Subnet mask of the OpenVPN network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> <span style="color: #20C0D7;"><b>Virtual network IPv6 address</b></span></td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Assign IP start</td>
        <td>IP; default: <b>none</b></td>
        <td>Assign IP addresses starting from a pool of subnets to be dynamically allocated to connecting clients.</td>
    </tr>
    <tr>
    <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Assign IP end</td>
        <td>IP; default: <b>none</b></td>
        <td>Assign IP addresses ending at a pool of subnets to be dynamically allocated to connecting clients.</td>
    </tr>
    <tr>
    <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: <span style="color: green;"><b>Virtual network IPv6 address</b></span></td>
         <td>ip6; default: <b>none</b></td>
         <td>ip6; default: <b>none</b></td>
         <td>IPv6 address of the OpenVPN network. This field becomes visible when protocol is set to UDP6 or TCP6</td>
         <td>IPv6 address of the OpenVPN network. This field becomes visible when protocol is set to UDP6 or TCP6</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Push option</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Push option</td>
       <td>OpenVPN options; default: <b>none</b></td>
       <td>OpenVPN options; default: <b>none</b></td>
       <td>Push options are a way to "push" routes and other additional OpenVPN options to connecting clients.</td>
       <td>Push options are a way to "push" routes and other additional OpenVPN options to connecting clients.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Allow duplicate certificates</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Allow duplicate certificates</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>When enabled allows multiple clients to connect using the same certificates.</td>
         <td>When enabled allows multiple clients to connect using the same certificates.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: #0054a6;">TLS/Password:</span> User name</td>
       <td><span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Usernames & Passwords</td>
      <td>string; default: <b>none</b></td>
       <td>-interactive button; default: <b>none</b></td>
      <td>Username used for authentication to this OpenVPN server.</td>
       <td>File containing usernames and passwords against which the server can authenticate clients. Each username and password pair should be placed on a single line and separated by a space..</td>
    </tr>
    <tr>
      <td><span style="color: #0054a6;">TLS/Password:</span> Password</td>
       <td>string; default: <b>none</b></td>
       <td>Password used for authentication to this OpenVPN server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 437: Line 464:
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Certificate authority</td>
       <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Certificate authority</td>
       <td>.ca file; default: <b>none</b></td>
       <td>.ca file; default: <b>none</b></td>
       <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.</td>
       <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Server certificate</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Server certificate</td>
         <td>.crt file; default: <b>none</b></td>
         <td>.crt file; default: <b>none</b></td>
         <td>A type of digital certificate that is used to identify the OpenVPN server.</td>
         <td>A type of digital certificate that is used to identify the OpenVPN server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Server key</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Server key</td>
         <td>.key file; default: <b>none</b></td>
         <td>.key file; default: <b>none</b></td>
         <td>Authenticates clients to the server.</td>
         <td>Authenticates clients to the server.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> Diffie Hellman parameters</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: Diffie Hellman parameters</td>
         <td>.pem file; default: <b>none</b></td>
         <td>.pem file; default: <b>none</b></td>
         <td>DH parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange.</td>
         <td>DH parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td><span style="color: red;">TLS</span>/<span style="color: #0054a6;">TLS/Password:</span> CRL file (optional)</td>
     <td><span style="color: red;">TLS</span>/<span style="color: olive;">TLS/Password</span>/<span style="color: #0054a6;">Password</span>: CRL file (optional)</td>
         <td>.pem file {{!}} .crl file; Default: <b>none</b></td>
         <td>.pem file {{!}} .crl file; Default: <b>none</b></td>
         <td>A certificate revocation list (CRL) file is a list of certificates that have been revoked by the certificate authority (CA). It indicates which certificates are no longer acccepted by the CA and therefore cannot be authenticated to the server.</td>
         <td>A certificate revocation list (CRL) file is a list of certificates that have been revoked by the certificate authority (CA). It indicates which certificates are no longer acccepted by the CA and therefore cannot be authenticated to the server.</td>
Line 468: Line 495:
         <ul>
         <ul>
             <li>Red for <span style="color: red;">Authentication: TLS</span></li>
             <li>Red for <span style="color: red;">Authentication: TLS</span></li>
            <li>Olive for <span style="color: olive;">Authentication: TLS/Passwords</span></li>
             <li>Purple for <span style="color: purple;">Authentication: Static key</span></li>
             <li>Purple for <span style="color: purple;">Authentication: Static key</span></li>
             <li>Blue for <span style="color: #0054a6;">Authentication: TLS/Password</span></li>
             <li>Blue for <span style="color: #0054a6;">Authentication: Password</span></li>
            <li>Brown for <span style="color: #8B4513;">OpenVPN config from file</span></li>
         </ul>
         </ul>
     </li>
     </li>
Line 655: Line 684:
     <tr>
     <tr>
     <td>Outbound key</td>
     <td>Outbound key</td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>integer [0..4294967295]; default: <b>none</b></td>
         <td>A key used to identify outgoing packets. This value should match the "Inbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.</td>
         <td>A key used to identify outgoing packets. This value should match the "Inbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Inbound key</td>
     <td>Inbound key</td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>integer [0..4294967295]; default: <b>none</b></td>
         <td>A key used to identify incoming packets. This value should match the "Outbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.</td>
         <td>A key used to identify incoming packets. This value should match the "Outbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.</td>
     </tr>
     </tr>
Line 744: Line 773:
     <tr>
     <tr>
       <td>Authentication method</td>
       <td>Authentication method</td>
       <td>Pre-shared key {{!}} <span style="color:darkred">X.509 {{!}} EAP</span> {{!}} <span style="color:blue">PKCS#12</span>; default: <b>Pre-shared key</b></td>
       <td><span style="color:chocolate">Pre-shared key</span> {{!}} <span style="color:darkred">X.509 {{!}} EAP</span> {{!}} <span style="color:blue">PKCS#12</span>; default: <b>Pre-shared key</b></td>
       <td>Specify authentication method. Choose between Pre-shared key and X.509 certificates.</td>
       <td>Specify authentication method. Choose between Pre-shared key and X.509 certificates.</td>
     </tr>
     </tr>
Line 2,091: Line 2,120:
WireGuard works by adding an interface which acts as a tunnel. To create one enter its name and click the <b>Add</b> button. This should add a new Wireguard instance and open a configuration window.
WireGuard works by adding an interface which acts as a tunnel. To create one enter its name and click the <b>Add</b> button. This should add a new Wireguard instance and open a configuration window.


[[File:Networking_rutx_vpn_wireguard_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_vpn_wireguard_v2.png|border|class=tlt-border]]


===General Instance Settings===
===General Instance Settings===
Line 2,099: Line 2,128:
Private keys and generate them, specify Port and IP addresses for communication.
Private keys and generate them, specify Port and IP addresses for communication.


[[File:Networking_rutx_vpn_wireguard_instance_general_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_vpn_wireguard_instance_general_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 2,114: Line 2,143:
     <tr>
     <tr>
     <td>Private Key</td>
     <td>Private Key</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>-</b></td>
         <td>Private Key used in authentication.</td>
         <td>Private Key used in authentication.</td>
     </tr>
     </tr>
Line 2,123: Line 2,152:
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Generate</td>
     <td>Generate key pair</td>
         <td>-(interactive button)</td>
         <td>-(interactive button)</td>
         <td>Click to generate Public Key and Private Key.</td>
         <td>Click to generate Public Key and Private Key.</td>
    </tr>
    <tr>
    <td>Listen Port</td>
        <td>integer [0..65535]; default: <b>none</b></td>
        <td>Specify port to listen for incomming connections. It will be set to a random integer if left empty.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 2,145: Line 2,169:
Advanced Settings section contains Metric and MTU configuration for this WireGuard interface.
Advanced Settings section contains Metric and MTU configuration for this WireGuard interface.


[[File:Networking_rutos_vpn_wireguard_instance_advanced_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_vpn_wireguard_instance_advanced_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 2,156: Line 2,180:
     <td>Metric</td>
     <td>Metric</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>Specify metric for this tunnel interface. Lower number means higher priority.</td>
         <td>Specify (Optional) metric for this tunnel interface. Lower number means higher priority.</td>
    </tr>
    <tr>
    <td>Listen port</td>
        <td>integer [1..65535]; default: <b>51820</b></td>
        <td>Required. UDP port used for outgoing and incoming packets.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>MTU</td>
     <td>MTU</td>
         <td>integer [1280..1420]; default: <b>none</b></td>
         <td>integer [68..9200]; default: <b>none</b></td>
         <td>Maximum Transmission Unit for this tunnel interface.</td>
         <td>Maximum Transmission Unit of tunnel interface. Range [68 to 9200]. If not specified, the MTU is automatically determined by physical interface MTU value.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>DNS servers</td>
     <td>DNS servers</td>
         <td>ip | ips; default: <b>none</b></td>
         <td>ip; default: <b>none</b></td>
         <td>DNS server(s) for this Wireguard interface.</td>
         <td>DNS server(s) for this Wireguard interface.</td>
     </tr>
     </tr>
Line 2,174: Line 2,203:
----
----


The Peers section is used to create and configure all the peers for this interface.  
The Peers section is used to create and configure all the peers for this interface. To create one enter its name and click the <b>Add</b> button.
To create one enter its name and click the <b>Add</b> button.  
 
To configure it click the <b>Edit</b> [[File:Networking_rutx_manual_edit_button_v1.png]] button.
[[File:Networking_rutx_vpn_wireguard_instance_peer_v3.png|border|class=tlt-border]]
[[File:Networking_rutx_vpn_wireguard_instance_peer_v2.png|border|class=tlt-border]]




Line 2,185: Line 2,213:
In the General section of Peer instance you can configure basic information about the endpoint to allow communications.   
In the General section of Peer instance you can configure basic information about the endpoint to allow communications.   


[[File:Networking_rutos_vpn_wireguard_instance_peer_instance_general_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_vpn_wireguard_instance_peer_instance_general_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 2,196: Line 2,224:
     <td>Public Key</td>
     <td>Public Key</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Endpoint's Public Key.</td>
         <td>Base64-encoded public key of peer.</td>
    </tr>
    <tr>
    <td>Endpoint host</td>
        <td>domain name {{!}} ip; default: <b>none</b></td>
        <td>Host of peer. Names are resolved prior to bringing up the interface.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Allowed IPs</td>
     <td>Allowed IPs</td>
         <td>ip; default: <b>none</b></td>
         <td>ip; default: <b>none</b></td>
         <td>A single IP address or a list of them which are allowed to communicate with this peer.</td>
         <td>IP addresses and prefixes that this peer is allowed to use inside the tunnel. Usually the peer's tunnel IP addresses and the networks the peer routes through the tunnel.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 2,211: Line 2,244:
       <td>Route Allowed IPs</td>
       <td>Route Allowed IPs</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Enable to create routes for <b>Allowed IPs</b> for this peer.</td>
         <td>Create routes for Allowed IPs for this peer.</td>
     </tr>
     </tr>
</table>
</table>
Line 2,222: Line 2,255:
settings such as its Description, Endpoint Host and Port, Preshared Key and other.  
settings such as its Description, Endpoint Host and Port, Preshared Key and other.  
See more information below.  
See more information below.  
[[File:Networking_rutx_vpn_wireguard_instance_peer_instance_advanced_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_vpn_wireguard_instance_peer_instance_advanced_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 2,231: Line 2,264:
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Description</td>
     <td>Tunnel source</td>
         <td>string; default: <b>none</b></td>
         <td>Any {{!}} LAN {{!}} WAN {{!}} Mobile; default: <b>Any</b></td>
         <td>Description of this peer.</td>
         <td>Interface to bind this instance to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 2,241: Line 2,274:
     </tr>
     </tr>
     <tr>
     <tr>
      <td>Route Allowed IPs</td>
    <td>Endpoint Port</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>integer [1..65535]; default: <b>none</b></td>
         <td>Enable to create routes for <b>Allowed IPs</b> for this peer.</td>
         <td>Port of peer.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Endpoint Host</td>
     <td>Persistent Keep Alive</td>
        <td>ip {{!}} url; default: <b>none</b></td>
        <td>IP or URL of Remote Endpoint.</td>
    </tr>
    <tr>
    <td>Endpoint Port</td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>Specify port to connect to Remote Endpoint. It will be set to <b>51820</b> if left empty.</td>
         <td>Seconds between keep alive messages. Default is 0 (disabled). Recommended value if this device is behind a NAT is 25. Range [0 to 65535].</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Persistent Keep Alive</td>
     <td>Routing table</td>
         <td>integer [0..65535]; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Specify time amount in seconds between Keep Alive messages. By default this option is <b>0</b> which means it is disabled. Recommended value for a device behind NAT is 25.</td>
         <td>Defines which routing table to use for this peer routes, not necessary to configure for most setups..</td>
     </tr>
     </tr>
</table>
</table>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/123667...129066"