Changes

Template:Networking rutos manual routing (view source)

Revision as of 09:17, 17 April 2024

1,250 bytes removed ,  17 April
no edit summary
Line 369: Line 369:  
====BGP Instance====
 
====BGP Instance====
 
----
 
----
−
The <b>BGP Instance</b> section is used to configure some of the main operating parameters of the BGP protocol. Below is an example of the BGP Instance section.
     −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance_v1.png|border|class=tlt-border]]
+
To create a new BGP instance, look to the Add New Instance section under BGP instances; type in a custom name for the BGP instance and click the 'Add' button or you can `Edit` a general instance:
 +
 
 +
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance_edit.png|border|class=tlt-border]]
 +
 
 +
Below is an example of the BGP Instance section:
 +
 
 +
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_instance_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 386: Line 391:  
     <tr>
 
     <tr>
 
       <td>AS</td>
 
       <td>AS</td>
−
       <td>integer [1..65535]default: <b>none</b></td>
+
       <td>integer [1..4294967295]; default: <b>none</b></td>
−
         <td>BGP Autonomous System (AS) number. It is an identifier that represents a routing domain; BGP routers can exchange routes within the same Autonomous System.</td>
+
         <td>AS number is an identification of an autonomous system. BGP protocol uses the AS number for detecting whether the BGP connection is an internal one or external one.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 398: Line 403:  
         <td>ip/netmask; default: <b>none</b></td>
 
         <td>ip/netmask; default: <b>none</b></td>
 
         <td>Adds an announcement network(s). Routes to these networks will be shared over BGP.</td>
 
         <td>Adds an announcement network(s). Routes to these networks will be shared over BGP.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>VRF interface</td>
 +
        <td>VRF interface; default: <b>Default</b></td>
 +
        <td>To create new VRF interface, please visit: [[{{{name}}} VRF|VRF]] </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 420: Line 430:  
<b>BGP Peers</b> are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by default.
 
<b>BGP Peers</b> are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by default.
   −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_v2.png|border|class=tlt-border]]
    
To create a new Peer, look to the Add New Instance section under BGP Peer; type in a custom name for the BGP Peer and click the 'Add' button:
 
To create a new Peer, look to the Add New Instance section under BGP Peer; type in a custom name for the BGP Peer and click the 'Add' button:
   −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button_v1.png|border|class=tlt-border]]
−
 
  −
The newly added BGP Peer configuration should look similar to this:
  −
 
  −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_added.png|border|class=tlt-border]]
  −
 
  −
<table class="nd-mantable">
  −
    <tr>
  −
        <th>Field</th>
  −
      <th>Value</th>
  −
      <th>Description</th>
  −
    </tr>
  −
    <tr>
  −
      <td>Remote AS</td>
  −
      <td>integer [1..65535]; default: <b>none</b></td>
  −
      <td>Remote autonomous system number of this remote BGP Neighbor.</td>
  −
    </tr>
  −
    <tr>
  −
    <td>Remote address</td>
  −
        <td>ip4; default: <b>none</b></td>
  −
        <td>IPv4 address of this remote BGP Neighbor.</td>
  −
    </tr>
  −
    <tr>
  −
      <td>Enable</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Turns turns this BGP peer on or off.</td>
  −
    </tr>
  −
</table>
  −
 
  −
To see more settings for a BGP Peer, click the 'Edit' button next to it:
     −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_edit_button.png|border|class=tlt-border]]
+
You will be redirected to general peer settings:
   −
The full BGP Peer configuration page should look similar to this:
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_bgp_peer_v4.png|border|class=tlt-border]]
−
 
  −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_bgp_peer_v3.png|border|class=tlt-border]]
      
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 474: Line 453:  
     <tr>
 
     <tr>
 
       <td>Remote AS</td>
 
       <td>Remote AS</td>
−
       <td>integer [1..65535]; default: <b>none</b></td>
+
       <td>integer [1..4294967295]; default: <b>none</b></td>
 
       <td>Remote autonomous system number of this remote BGP Neighbor.</td>
 
       <td>Remote autonomous system number of this remote BGP Neighbor.</td>
 
     </tr>
 
     </tr>
Line 533: Line 512:  
A <b>BGP Peer Group</b> is a collection of routers that use the BGP protocol to dynamically redistribute routes among peers (other routers). The figure below is an example of the BGP Peer Groups section, which is empty by default.
 
A <b>BGP Peer Group</b> is a collection of routers that use the BGP protocol to dynamically redistribute routes among peers (other routers). The figure below is an example of the BGP Peer Groups section, which is empty by default.
   −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_v2.png|border|class=tlt-border]]
    
To create a new Peer Group, look to the Add New Instance section under BGP Peer Groups; type in a custom name for the BGP Peer Group and click the 'Add' button:
 
To create a new Peer Group, look to the Add New Instance section under BGP Peer Groups; type in a custom name for the BGP Peer Group and click the 'Add' button:
   −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_add_button.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peers_groups_add_button_v1.png|border|class=tlt-border]]
−
 
  −
The newly added BGP Peer Group configuration should look similar to this:
  −
 
  −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_added.png|border|class=tlt-border]]
  −
 
  −
<table class="nd-mantable">
  −
    <tr>
  −
        <th>Field</th>
  −
      <th>Value</th>
  −
      <th>Description</th>
  −
    </tr>
  −
    <tr>
  −
      <td>Remote AS</td>
  −
      <td>integer [1..65535]; default: <b>none</b></td>
  −
      <td>Remote autonomous system number.</td>
  −
    </tr>
  −
</table>
  −
 
  −
To see more settings for a BGP Peer Group, click the 'Edit' button next to it:
  −
 
  −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_edit_button.png|border|class=tlt-border]]
     −
The full BGP Peer Group configuration page should look similar to this:
+
You will be redirected to general peer groups settings:
   −
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_bgp_peer_group_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_routing_dynamic_routes_bgp_bgp_peer_groups_bgp_peer_group_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/123947"

Navigation menu