Changes

Template:Networking rutos manual mobile utilities (view source)

Revision as of 11:43, 22 April 2024

37 bytes added ,  22 April
no edit summary
Line 19: Line 19:  
The <b>SMS Utilities</b> section contains a list of rules that perform certain actions when they are activated by SMS messages.
 
The <b>SMS Utilities</b> section contains a list of rules that perform certain actions when they are activated by SMS messages.
   −
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_sms_rules.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_sms_rules_v1.png|border|class=tlt-border]]
    
The entire list contains more than 20 rules, but it does not include all possible SMS actions. You can also create custom rules or modify existing rules. All possible SMS rule actions, their default SMS texts and descriptions are listed in the table below.
 
The entire list contains more than 20 rules, but it does not include all possible SMS actions. You can also create custom rules or modify existing rules. All possible SMS rule actions, their default SMS texts and descriptions are listed in the table below.
Line 260: Line 260:  
===Modify SMS Rule===
 
===Modify SMS Rule===
 
----
 
----
−
Every SMS rule can be edited to your liking. To begin configuring a rule, click the click the 'Edit' button located next to it:
+
Every SMS rule can be edited to your liking. To begin configuring a rule, click the click the 'Edit' button under "Actions" column:
   −
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_edit_button.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_edit_button_v1.png|border|class=tlt-border]]
    
After this you should redirected to configuration page for that rule. Below are examples of what the configuration page for the <i>reboot</i> rule looks like.
 
After this you should redirected to configuration page for that rule. Below are examples of what the configuration page for the <i>reboot</i> rule looks like.
Line 268: Line 268:  
<b>General settings</b>
 
<b>General settings</b>
 
----
 
----
−
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_general_dualmodem_{{{dualmodem}}}_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_general_dualmodem_{{{dualmodem}}}_v3.png|border|class=tlt-border]]
    
<ol>
 
<ol>
 
     <li>The <b>Enable</b> slider turn the rule on or off. In order to use a rule, this slider must be set to 'on'. By default, all existing SMS rules are turned on.</li>
 
     <li>The <b>Enable</b> slider turn the rule on or off. In order to use a rule, this slider must be set to 'on'. By default, all existing SMS rules are turned on.</li>
 
     <li>The <b>Action</b> dropdown selection specifies which action should be performed when the rule is executed.</li>
 
     <li>The <b>Action</b> dropdown selection specifies which action should be performed when the rule is executed.</li>
 +
    {{#ifeq: {{{dualmodem}}} | 1 |<li>The <b>Receiving modem</b>, which is used to receive the message.</li>|}}
 
     <li>The <b>SMS text</b> field specifies the text that will trigger the rule upon receiving a message.</li>
 
     <li>The <b>SMS text</b> field specifies the text that will trigger the rule upon receiving a message.</li>
 
     <li>The <b>Get status via SMS after reboot</b> slider specifies whether the device should send a status report message after an action is executed. The name of this slider may differ from rule to rule and it is only available for some rules.</li>
 
     <li>The <b>Get status via SMS after reboot</b> slider specifies whether the device should send a status report message after an action is executed. The name of this slider may differ from rule to rule and it is only available for some rules.</li>
 
     <li>The <b>Message forwarding</b> slider specifies whether the device should send a status report message to another number (besides the original sender). Setting this slider to 'on' will prompt you to enter an additional phone number(s) of the status message recipient(s).</li>
 
     <li>The <b>Message forwarding</b> slider specifies whether the device should send a status report message to another number (besides the original sender). Setting this slider to 'on' will prompt you to enter an additional phone number(s) of the status message recipient(s).</li>
−
     {{#ifeq: {{{dualmodem}}} | 1 |<li>The <b>Modem</b> option is used to specify which modem to get<nowiki>/</nowiki>set information to<nowiki>/</nowiki>from.</li>
+
     {{#ifeq: {{{dualmodem}}} | 1 |<li>The <b>Modem</b>, which is used to get information from or managed for change mobile settings action.</li>|}}
−
    <li>The <b>Gateway modem</b> option is used to specify which modem to use for sending SMS.</li>|}}
+
     <li>The <b>Message text</b> box is used to modify the text that should be included in an SMS rule's response message.</li>
−
     <li>The <b>Text messagetext</b> box is used to modify the text that should be included in an SMS rule's response message.</li>
   
</ol>
 
</ol>
    
<b>Authorization</b>
 
<b>Authorization</b>
 
----
 
----
−
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_authorization.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_authorization_v1.png|border|class=tlt-border]]
    
<ol>
 
<ol>
Line 296: Line 296:  
The <b>Change mobile settings</b> rule is used to change the configuration settings of the mobile data connection. The usage of this rule is a bit more complex because the SMS text in and of itself does nothing, as you must also specify the parameters and values that you wish to set. For example, you can send a message that will change your APN only or a message that will change multiple parameters at once.
 
The <b>Change mobile settings</b> rule is used to change the configuration settings of the mobile data connection. The usage of this rule is a bit more complex because the SMS text in and of itself does nothing, as you must also specify the parameters and values that you wish to set. For example, you can send a message that will change your APN only or a message that will change multiple parameters at once.
   −
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_cellular_dualsim_{{{dualsim}}}_{{{dualmodem}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_cellular_dualsim_{{{dualsim}}}_{{{dualmodem}}}_v2.png|border|class=tlt-border]]
    
Below is the full list of parameters that can be changed with this rule.
 
Below is the full list of parameters that can be changed with this rule.
Line 388: Line 388:  
The <b>UCI API</b> rule is used to configure any parameters on the device.
 
The <b>UCI API</b> rule is used to configure any parameters on the device.
   −
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_uci_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_utilities_sms_utilities_modify_sms_rule_uci_{{{dualmodem}}}_v4.png|border|class=tlt-border]]
 
----
 
----
 
The following are syntax examples for the UCI API rule:
 
The following are syntax examples for the UCI API rule:
Line 440: Line 440:  
API allows creating, reading, updating, or deleting configurations using the allowed API endpoints from a list.
 
API allows creating, reading, updating, or deleting configurations using the allowed API endpoints from a list.
   −
[[File:Networking rutos manual mobile utilities sms utilities modify sms rule api v1.png|border|class=tlt-border]]
+
[[File:Networking rutos manual mobile utilities sms utilities modify sms rule api {{{dualmodem}}}_v3.png|border|class=tlt-border]]
 
----
 
----
 
The following are syntax examples for the API rule:
 
The following are syntax examples for the API rule:
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/124119"

Navigation menu