215
edits
Changes
Created page with "{{Template: Networking_device_manual_sd_card | series = RUT9M | name = RUT956 | sd_png = Networking_rut955_manual_sd_card.png <!--------------STEPS--------------> | 1 =..."
{{Template: Networking_device_manual_sd_card
| series = RUT9M
| name = RUT956
| sd_png = Networking_rut955_manual_sd_card.png
<!--------------STEPS-------------->
| 1 = Disconnect from power and remove back panel from the device, pull out PCB board to reach SD card socket
| 2 = Slide SD card holder forward to open it
| 3 = Carefully insert SD card into the socket (pay attention to SD card and socket cutouts)
| 4 = Close SD card socket holder and slide it backwards until it locks
| 5 = Slide back PCB into device housing and attach back panel. Now you can power your device and use it.
}}
| series = RUT9M
| name = RUT956
| sd_png = Networking_rut955_manual_sd_card.png
<!--------------STEPS-------------->
| 1 = Disconnect from power and remove back panel from the device, pull out PCB board to reach SD card socket
| 2 = Slide SD card holder forward to open it
| 3 = Carefully insert SD card into the socket (pay attention to SD card and socket cutouts)
| 4 = Close SD card socket holder and slide it backwards until it locks
| 5 = Slide back PCB into device housing and attach back panel. Now you can power your device and use it.
}}
