Changes

Template:Networking device manual device recovery (view source)

Revision as of 13:23, 20 June 2024

138 bytes added ,  Thursday at 13:23
no edit summary
Line 8: Line 8:     
<ul>
 
<ul>
−
     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100=3|#default=1}}</b></li>
+
     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5|TRB16=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100=3|#default=1}}</b></li>
 
     <li>Default Username: <b>admin</b></li>
 
     <li>Default Username: <b>admin</b></li>
 
     <li>Default Password: {{#ifeq:{{{unique_pass}}}|1|see password on bottom of the device|<b>admin01</b> or random generated password<span class="asterisk">*</span>}}</li>
 
     <li>Default Password: {{#ifeq:{{{unique_pass}}}|1|see password on bottom of the device|<b>admin01</b> or random generated password<span class="asterisk">*</span>}}</li>
Line 34: Line 34:  
The reset button has two functions:
 
The reset button has two functions:
 
<ul>
 
<ul>
−
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}
+
     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB1|TRB2|TRB2M|TRB16=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}
−
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}
+
     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X|TRB2M|TRB16|TRB1|TRB2=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}
−
| TRB14x|TRB2xx|TRB5 = gateway
+
| TRB14x|TRB2xx|TRB5|TRB16|TRB2M|TRB1|TRB2 = gateway
 
| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
 
| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>
 
</ul>
 
</ul>
Line 57: Line 57:  
----
 
----
 
You can perform a factory reset with the SMS Utilities <b>restore</b> rule. If the rule hasn't been disabled or changed in any way, all you need to do is send an SMS message to the {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=gateway|#default=router}} containing the text:
 
You can perform a factory reset with the SMS Utilities <b>restore</b> rule. If the rule hasn't been disabled or changed in any way, all you need to do is send an SMS message to the {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=gateway|#default=router}} containing the text:
−
  {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=<b><gateway_password> restore</b> | #default=<b><router_password> restore</b>}}
+
  {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=<b><gateway_password> restore</b> | #default=<b><router_password> restore</b>}}
   −
Replace {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5=<i><gateway_password></i> | #default=<i><router_password></i>}} with your actual password. You can find more information on SMS Utilities rules <b>[[{{{name}}} Mobile Utilities|here]]</b>.|}}
+
Replace {{#switch: {{{series}}} | TRB14x|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=<i><gateway_password></i> | #default=<i><router_password></i>}} with your actual password. You can find more information on SMS Utilities rules <b>[[{{{name}}} Mobile Utilities|here]]</b>.|}}
    
===Command line===
 
===Command line===
Line 65: Line 65:  
You can perform a factory reset via command line by executing the <b>firstboot</b> command. After this you will be asked to confirm the reset. If you're sure, type the letter <b>y</b> and press "Enter" or type the letter <b>n</b> if you wish to cancel the reset.
 
You can perform a factory reset via command line by executing the <b>firstboot</b> command. After this you will be asked to confirm the reset. If you're sure, type the letter <b>y</b> and press "Enter" or type the letter <b>n</b> if you wish to cancel the reset.
   −
If you agreed to perform a factory reset, next type in <b>reboot</b> and press "Enter". The {{#switch: {{{series}}} |TRB1xx|TRB2xx|TRB5=gateway|#default=router}} will be reset to it's factory settings and rebooted. The entire sequence of events should look like this:
+
If you agreed to perform a factory reset, next type in <b>reboot</b> and press "Enter". The {{#switch: {{{series}}} |TRB1xx|TRB2xx|TRB5|TRB1|TRB2|TRB2M|TRB16=gateway|#default=router}} will be reset to it's factory settings and rebooted. The entire sequence of events should look like this:
    
{{Template: Networking_{{#ifeq:{{{series}}}|TRB14x|{{lc:{{{series}}}}}|rutxxx}}_manual_device_recovery_cli
 
{{Template: Networking_{{#ifeq:{{{series}}}|TRB14x|{{lc:{{{series}}}}}|rutxxx}}_manual_device_recovery_cli
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/127243"

Navigation menu