1,266
edits
Changes
→Data limit
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Denies data connection on roaming conditions.</td>
<td>Denies data connection on roaming conditions.</td>
</tr>
<tr>
<td>PIN</td>
<td>integer [0000..99999999]; default: <b>none</b></td>
<td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
</tr>
</table>
===Interface mob1s1a1 APN configuration===
[[File:Networking rutos manual mobile general interface configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Auto APN</td>
<td>on | <span style="color:red">off</span>; default: <b>on</b></td>
<td>Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database )</td>
</tr>
<tr>
<td>APN</td>
<td>string; default: <b>none</b></td>
<td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:
<ul>
<li>rac;</li>
<li>lac;</li>
<li>sgsn;</li>
<li>rnc;</li>
</ul>it cannot end in:
<ul>
<li>.gprs;</li>
</ul>and it cannot contain the asterisk symbol (<b>*</b>).
</td>
</tr>
<tr>
<td><span style="color:red">Authentication type</span></td>
<td>None | <span style="color:green">PAP | CHAP</span>; default: <b>None</b></td>
<td>Authentication method that your carrier uses to authenticate new connections on it's network</td>
</tr>
<tr>
<td><span style="color:green">Username</span></td>
<td>string; default: <b>empty</b></td>
<td>Username provided by your carrier</td>
</tr>
<tr>
<td><span style="color:green">Password</span></td>
<td>string; default: <b>empty</b></td>
<td>Password provided by your carrier</td>
</tr>
</table>
==Connection==
===Connection===
{{#switch: {{{name}}}
|#default = [[File:Networking_rutos_manual_mobile_connection_connection.png|border|class=tlt-border]]
|TRB245|RUT956|RUT951|RUT906|RUT901|RUT241 = [[File:Networking_rutos_manual_mobile_connection_connection_2g.png|border|class=tlt-border]]
|TRB256 = [[File:Networking_rutos_manual_mobile_connection_connection_trb2m.png|border|class=tlt-border]]
|RUTX50|TRB500|RUTM50|RUTC50 = [[File:Networking_rutos_manual_mobile_connection_connection_5g.png|border|class=tlt-border]]}}
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>{{#switch:{{{name}}}|RUT230|TRB255|TRB256=|#default=
</tr>{{#switch:{{{name}}}|RUT230|TRB255|TRB256=|#default=
<tr>
<tr>
</tr>}}
</tr>}}
<tr>
<tr>
<td>Network type</td>
<td>Preferred network type</td>
<td>{{#switch: {{{series}}}
<td>{{#switch: {{{series}}}
|RUTX|RUTM|RUTC = {{#switch: {{{name}}}
|RUTX|RUTM|RUTC = {{#switch: {{{name}}}
<td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Network type is set to <i>4G/2G auto {{!}} 4G only</i>.</td>
<td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Network type is set to <i>4G/2G auto {{!}} 4G only</i>.</td>
</tr>|#default=}}
</tr>|#default=}}
<tr>
<tr>
<td>Band selection</td>
<td>Band selection</td>
</tr>
</tr>
</table>
</table>
===Low signal reconnect===
===Low signal reconnect===
</table>
</table>
===Operator settings===
==Limits==
===Data limit===
----
----
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist). This function has been removed on from <b>TRB255</b> since TRB2_R_00.07.05 release.
The <b>Data Limit</b> section provides you with the possibility to set up a maximum used data cap for your SIM card.
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_data_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
To configure <b>Data Limit</b> press <b>Edit</b>
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Enable</td>
<td>Enable data connection limit</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Enables Whitelist or Blacklist for specified operator list.</td>
<td>Disables mobile data when the limit for the current period is reached</td>
</tr>
<tr>
<td>Data limit (MB)</td>
<td>integer; default: <b>none</b></td>
<td>Disable mobile data after the limit value in MB is reached</td>
</tr>
<tr>
<td>Reset period</td>
<td>Day | Week | Month; default: <b>Day</b></td>
<td>Interval for resetting mobile data usage limit.</td>
</tr>
<tr>
<td>Reset time</td>
<td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
<td>Specify the hour (in 24-hour format) when the mobile data limit reset occurs.</td>
</tr>
<tr>
<td>Enable SMS warning</td>
<td>on | off; default: <span style="color:red"><b>off</b></span></td>
<td>Enables sending of warning SMS message when mobile data limit is reached.</td>
</tr>
<tr>
<td><span style="color:red">Warning threshold</span></td>
<td>integer; default: <b>none</b></td>
<td>Send warning SMS message after threshold in MB is reached. Warning threshold cannot be higher than data limit!</td>
</tr>
</tr>
<tr>
<tr>
<td>Mode</td>
<td><span style="color:red">Phone number</span></td>
<td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
<td>integer; default: <b>none</b></td>
<td>Mode to be applied for operator list.<br>
<td>A phone number to send warning SMS message to</td>
</tr>
</tr>
<tr>
<tr>
<td>Operator list</td>
<td>Clear collected data</td>
<td>operator list; default: <b>none</b></td>
<td>- (interactive button)</td>
<td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
<td>The data collected for this interface will be cleared, but only if the interface is active</td>
</tr>
</tr>
</table>
</table>
===SMS limit settings===
===SMS limit===
----
The <b>SMS Limit</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_sms_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
----
----
To configure <b>SMS Limit</b> press <b>Edit</b>
[[File:Networking_rutos_manual_mobile_general_sms_limit_settings_v3.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_mobile_limit_sms_limit_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Start hour/day</td>
<td>Reset time</td>
<td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
<td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
<td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td>
<td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td>
</tr>
</tr>
<tr>
<tr>
<td>- (interactive button)</td>
<td>- (interactive button)</td>
<td>Clears the SMS limit counter for the selected period.</td>
<td>Clears the SMS limit counter for the selected period.</td>
</tr>
</tr>
</table>
</table>
{{#switch: {{{name}}}|TRB255|TRB256= |#default=
{{#switch: {{{name}}}|TRB255|TRB256= |#default=
==Network operators==
==Network selection==
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}|}}
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}|}}
<li><b>Auto</b> - selects the operator automatically.</li>
<li><b>Auto</b> - selects the operator automatically.</li>
<li><b>Manual</b> - requires you to select the operator manually. (More on this selection [[#Manual_operator_selection|below]].)</li>
<li><b>Manual</b> - requires you to select the operator manually. (More on this selection [[#Manual_operator_selection|below]].)</li>
</ul>
</ul>
</td>
</td>
</tr>
</tr>
</table>
</table>}}
===Manual operator selection===
===Manual operator selection===
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v1.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]] }}
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v2.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]] }}
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2_v2.png|border|class=tlt-border]]
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3_v2.png|border|class=tlt-border]]
----
----
Once the scan has finished, you will see the results in the 'Available operators'.
Once the scan has finished, you will see the results in the 'Available operators'.
[[File:Networking_rutos_manual_mobile_network_operators_operators_list_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_mobile_network_operators_operators_list_v2.png|border|class=tlt-border]]
In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.
In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.
on a list you will be redirected to editing page in which you can enter operator codes for that list.
on a list you will be redirected to editing page in which you can enter operator codes for that list.
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v2.png|border|class=tlt-border]]}}
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v3.png|border|class=tlt-border]]}}
==Utilities==
===SIM PIN management===
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking rutos manual mobile utilities sim pin dualmodem.png|border|class=tlt-border]] | [[File:Networking rutos manual mobile utilities sim pin.png|border|class=tlt-border]]}}
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>SIM card lock</td>
<td>off | on; default: <b>off</b></td>
<td>Correct PIN code is required to enable or disable SIM card lock. Once SIM card lock is disabled you will not need to enter PIN code on any device to use SIM card.</td>
</tr>
<tr>
<td>Change PIN</td>
<td>- (interactive button)</td>
<td>Open modal window to change SIM PIN</td>
</tr>
</table>
{{#ifeq: {{{ussd}}} | 1 |
===USSD===
----
<b>Unstructured Supplementary Service Data (USSD)</b> is communication protocol used in communication between cellular devices and mobile network operators. It is usually used with prepaid SIM cards to enable/disable certain services or to obtain information from a network operator.
This section provides the possibility to send USSD messages to the mobile operator.
[[File:Networking_rutos_manual_mobile_general_ussd_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>USSD</td>
<td>string; default: <b>none</b></td>
<td>Enter a USSD code (up to 182 character) that you wish to send. To send the entered USSD code, click the 'Send' button below the Response box.</td>
</tr>
<tr>
<td>Send</td>
<td>- (interactive button)</td>
<td>Click to send the message entered in the USSD field.</td>
</tr>
<tr>
<td>Response message</td>
<td>string; default: <b>No response yet</b></td>
<td>Displays the response to the last sent USSD message. Receiving the response may take up to a minute.</td>
</tr>
</table>
|}}
===PIN/PUK lock notification===
----
If you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked. Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes.
Side message where the SIM is locked
[[File:Networking_rutos_manual_mobile_general_pin.png|border|class=tlt-border]]
Side message where the SIM is blocked
[[File:Networking_rutos_manual_mobile_general_puk.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_mobile_general_pin_puk.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>PIN</td>
<td>4-8 positive numeric chars (positive number); default: <b>none</b></td>
<td>SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.</td>
</tr>
<tr>
<td>PUK</td>
<td>8 positive numeric chars (positive number); default: <b>none</b></td>
<td>SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code</td>
</tr>
</table>
==APN Database==
==APN Database==