Changes

[[File:VLAN HOTSPOT CONFIGURATION SOL2.png|border|class=tlt-border]]

[[File:VLAN HOTSPOT CONFIGURATION SOL2.png|border|class=tlt-border]]

====Creating Management Firewall Zone====

===Creating Management Firewall Zone===

----

----

<ol>

<ol>

<li>Open WebUI -> Network -> Firewall -> General Settings -> Zones, Add new zone</li>

<li>Open WebUI -> Network -> Firewall -> General Settings -> Zones, Add new zone</li>

</ol>

</ol>

=====Zone Management====

=====Zone Management=====

----

----

<ol>

<ol>

<li>Select Allow forward to destination zones: '''lan'''</li>

<li>Select Allow forward to destination zones: '''lan'''</li>

</ol>

</ol>

====Inter-Zone Forwarding====

=====Inter-Zone Forwarding=====

<ol>

<ol>

<li>Select Allow Forward To Destination Zones: '''lan'''</li>

<li>Select Allow Forward To Destination Zones: '''lan'''</li>

</ol>

</ol>

 

====Management VLAN interface configuration====

====Management VLAN interface configuration====

After adding the new VLANs, the next step is to configure the interfaces that will be associated with these VLANs. In this example, we will begin by configuring the "Management" interface, which is intended for device management. To do this, navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write management or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

After adding the new VLANs, the next step is to configure the interfaces that will be associated with these VLANs. In this example, we will begin by configuring the "Management" interface, which is intended for device management. To do this, navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write management or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

<ol>

<ol>