Changes

<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.07.3'''] firmware version. .</p>  

<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.05.0'''] firmware version. .</p>  

==Introduction==

==Introduction==

[[File:VLAN HOTSPOT CONFIGURATION SOL2.png|border|class=tlt-border]]

[[File:VLAN HOTSPOT CONFIGURATION SOL2.png|border|class=tlt-border]]

====Management VLAN interface configuration====

====Management VLAN interface configuration====

After adding the new VLANs, the next step is to configure the interfaces that will be associated with these VLANs. In this example, we will begin by configuring the "Management" interface, which is intended for device management. To do this, navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write management or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

After adding the new VLANs, the next step is to configure the interfaces that will be associated with these VLANs. In this example, we will begin by configuring the "Management" interface, which is intended for device management. To do this, navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write management or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

<ol>

<ol>

<li>Dont forget to press Save & Apply</li>

<li>Dont forget to press Save & Apply</li>

</ol>

</ol>

===Router Hotspot configuration===

===Router Hotspot configuration===

[[File:Hotpost interface enable.png|border|class=tlt-border]]

[[File:Hotpost interface enable.png|border|class=tlt-border]]

==Access point (TAP100) configuration==

==Access point (TAP100) configuration==