151
edits
Changes
no edit summary
===Firmware update through WebUI===
===Firmware update through the WebUI===
The WebUI is the user-friendly graphical interface of the device. To update the firmware through the WebUI, navigate to the '''System -> Firmware -> Update''' '''Firmware''' page. This page allows you to check the current firmware version of the device and update the firmware either from a local file or directly from the server. If you wish to update the firmware from the server, your RUT, TRB, or TSW device must have internet access. If you choose to manually upload a firmware file, internet access on the router is not required.
The WebUI is the user-friendly graphical interface of the device. To update the firmware through the WebUI, navigate to the '''System -> Firmware -> Update''' '''Firmware''' page. This page allows you to check the current firmware version of the device and update the firmware either from a local file or directly from the server. If you wish to update the firmware from the server, your RUT, TRB, or TSW device must have internet access. If you choose to manually upload a firmware file, internet access on the router is not required.
Once the update is started, make sure not to power off the device. Wait until the device reboots and becomes accessible again.
Once the update is started, make sure not to power off the device. Wait until the device reboots and becomes accessible again.
===Firmware update through the RMS===
The Teltonika RMS platform can also be used to update the device's firmware. To update the firmware for device(s) selected from your device table, go to the RMS web page. In the left sidebar panel, navigate to Management → Devices and click on the Devices submenu. Then, move your mouse pointer to the top control Actions menu and select Update firmware (Actions → Update firmware).
[[File:Rms fw 1.1.png|border|class=tlt-border]]
After pressing the "Update firmware" button, you will be redirected to another page where you can choose to either upload the firmware file manually or download it from the server, just like in the WebUI.
[[File:Rms fw 2.png|border|class=tlt-border]]
When the update starts, your device will appear offline in RMS because it will be rebooting. The device may be unreachable for up to 1-2 minutes.