461
edits
Changes
→Relay WAN Confiuration
LAN IP/subnet: 192.168.4.1/24
LAN IP/subnet: 192.168.4.1/24
[[File:Networking_rutx_manual_lan_static_dhcp_server_relay_scheme_v2.png|border|class=tlt-border| center]]
[[File:DHCP_RELAY_9.png|border|class=tlt-border| center]]
===Configuration===
===Configuration===
}}
}}
====DHCP Server Node Configuration====
====DHCP Server Configuration====
----
----
=====LAN Configuration=====
=====LAN Configuration=====
----
----
=====Relay WAN Confiuration=====
=====Relay WAN Confiuration=====
----
Open router’s '''WebUI → Network → WAN → WAN interfaces''' click [[File:Pencil2.png]]current available WAN interface configuration:
Open router’s '''WebUI → Network → WAN → WAN interfaces''' click [[File:Pencil2.png]]current available WAN interface configuration:
======General Settings======
======General Settings======
[[File:DHCP_RELAY_4.png|border|class=tlt-border|center]]
[[File:DHCP_RELAY_4.png|border|class=tlt-border|center]]
=====DHCP Server Configuration=====
=====Firewall Rule Configuration=====
Open router’s '''WebUI → Network → Firewall → Traffic Rules''' click [[File:Pencil2.png]] on Allow-DHCP-Renew rule:
======Firewall - Traffic Rules - Allow-DHCP-Renew======
----
# Enter Destination Port: '''67'''
[[File:DHCP_RELAY_8.png|border|class=tlt-border|center]]
=====DHCP Replay Configuration=====
----
----
Open router’s '''WebUI → Network → DHCP → Server Settings → IPv4 → DHCPv4 servers''' click [[File:Pencil2.png]]current available server interface configuration:
Open router’s '''WebUI → Network → DHCP → Server Settings → IPv4 → DHCPv4 servers''' click [[File:Pencil2.png]]current available server interface configuration:
# Enable: '''on'''
# Enable: '''on'''
# Select DHCPv4 mode: '''Relay'''
# Select DHCPv4 mode: '''Relay'''
# Enter DHCP server address: '''192.168.2.1'''
# Enter DHCP server address: '''192.168.4.1'''
[[File:DHCP_RELAY_5.png|border|class=tlt-border|center|1000px]]
[[File:DHCP_RELAY_5.png|border|class=tlt-border|center|1000px]]
===Additional notes===
----
'''Note:''' It's strongly recommended to use static IP configuration for DHCP Relay WAN interface otherwise there might be cases when WAN interface will receive new IP address which will cause static route to stop working.
[[Category:Router control and monitoring]]
