266
edits
Changes
no edit summary
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.6'''] firmware version .</p>
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.08'''] firmware version .</p>
==Introduction==
==Introduction==
This article provides an extensive configuration example of a basic Relayd usage scenario with two RUTxxx devices.
This article provides an extensive configuration example of a basic Relayd usage scenario with two RUTxxx devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI" mode.''' You can do that by clicking the "Advanced" button, located at the top of the WebUI.
[[File:Networking_rutos_manual_webui_basic_advanced_mode_75.gif|border|center|class=tlt-border|1102x93px]]
==Configuration overview and prerequisites==
==Configuration overview and prerequisites==
* An active DHCP Server
* An active DHCP Server
A WiFi Access Point (AP) and DHCP Server are enabled by default on RUTxxx routers, but if you wish to make changes, you can find the configuration pages for these services by logging in to the router's WebUI and visiting the '''Network → Wireless''' section for WiFi and '''Network → Interfaces → LAN''' for DHCP.
A WiFi Access Point (AP) and DHCP Server are enabled by default on RUTxxx routers, but if you wish to make changes, you can find the configuration pages for these services by logging in to the router's WebUI and visiting the '''Network → Wireless''' section for WiFi and '''Network → DHCP''' for DHCP.
===RUT2===
===RUT2===
====Install Relayd Package====
====Install Relayd Package====
----
----
* Install Relayd package via WebUI by navigating to the '''System → Package Manager'''
* Install Relayd package via WebUI by navigating to the '''System → Package Manager → Packages''':
* Click '''Install''' button for '''Relay configuration''' package:
* Click '''Install''' button for '''Relay configuration''' package:
[[File:Networking rutxxx configuration example packages install relayd package v1.png|border|center|class=tlt-border|1000x200px]]
[[File:RutOS_Relay_WIFI_extender_7.8_package_relay_download.png|border|center|class=tlt-border|1000x200px]]
====WiFi WAN====
====WiFi WAN ====
----
----
* Set up WiFi WAN via WebUI by navigating to the '''Network → Wireless → SSIDs''':
*To set up WiFi WAN, login to the router's WebUI and navigate to the Network section found the Wireless tab by side ('''Network → Wireless → SSIDs''')
----
----
* Click the '''Scan 2.4Ghz''' button:
*To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point. You can choose whether to scan '''2.4 GHz''' or '''5 GHz''' wireless networks:
[[File:RutOS_Relay_WIFI_extender_7.8_wifi_scan.png|border|1100x1100px|alt=]]
*Once the scan is complete, you will be presented with a list of nearby WiFi Access Points. Locate and choose RUT1's Access Point and click "'''Join network'''":
[[File:RutOS_Relay_WIFI_extender_7.8_wifi_scan_connect.png|1100x1100px|alt=]]
*You will be redirected again to following window, where you will need to enter '''WPA passphrase''' or other security password depending on AP that you are connecting to.
[[File:RutOS_Relay_WIFI_extender_7.8_wifi_scan_connect_join.png|1100x1100px|border|class=tlt-border]]
* Next window that opens will be '''Wireless client Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by ''Access'' Point. Other than that, only difference from Access Point settings are in ''Interface Configuration'' → ''General Setup section'', where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''WAN''' instead of LAN:
[[File:RutOS_Relay_WIFI_extender_7.8_wifi_client_interface.png|1100x1100px|alt=]]
*Click Save & Apply and if you configured correctly, you will have Wireless Client working.
====Relay and DHCP Server ====
----
----
*Configuration for Relay takes place in the ''Relayd'' section and DHCP in the ''LAN'' section of the router's ''WebUI''. Log in and navigate to the ''Relayd'' section which is located by side of Network tab ('''Network → Wireless → Relayd'''):
# Enable '''Relay'''
# Select interface - '''lan'''
# Select Wireless interface - '''wifi1'''
[[File:RutOS_Relay_WIFI_extender_7.8_wifi_client_relayd.png|1100x1100px|alt=]]
[[File:Networking rutxxx configuration example ssids join network v1.png|border|center|class=tlt-border|1000x200px]]
'''NOTE''': If you '''can not see Relay Configuration section displayed''', Relay feature is additional software that can be installed from the System → Package Manager page. UDP Broadcast Relay is also an additional software that can be installed from the System → Package Manager page.
In this case scenario we choose interface named ''wifi1'', because we named wireless network to which we connect as client as ''wifi1''.
----
----
* Configuration for Relayd takes place in the Relayd section of the router's WebUI by navigating to the '''Network → Wireless → Relayd''':
*After we configured relay, we will need to disable '''DHCP''' settings on our '''LAN''' interface. Go to '''Network → LAN''' and click on the button '''Edit''':
[[File:Networking rutxxx configuration example relayd relayd setup v1.png|border|center|class=tlt-border|400x250px]]
[[File:RutOS_Relay_WIFI_extender_7.8_lan_edit.png|1100x1100px|alt=]]
*After you clicked '''Edit''' button settings window will appear. Below LAN interface settings section you will see '''DHCPv4 and DHCPv6''' settings section, where you will be available to '''disable''' DHCP server:
* In the Relayd section, set '''Enabled''' toggle to '''on''', set '''Interface''' option to '''lan''', set '''Wireless interface''' option to '''wifi1''', and click '''Save & Apply''' button:
# Disable '''DHCPv4'''
# Disable '''DHCPv6'''
[[File:RutOS_Relay_WIFI_extender_7.8_lan_dhcp_off.png|1100x1100px|border|class=tlt-border]]
[[File:Networking rutxxx configuration example lan disable dhcp v1.png|border|center|class=tlt-border|1000x300px]]
==Testing the set up==
==Testing the set up==
If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly. To test this particular set up, login to any of the routers go to '''Services → Maintenance → CLI'''. Login with user name: '''root''' and the router's admin password. You should then be able to '''ping''' the other router or any of the end devices that you have connected to either of the two router's. To execute a ping command, type '''ping <devices_ip>''' into the console and press the Enter key:
If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly. To test this particular set up, login to any of the routers go to '''System → Maintenance → CLI'''. Login with user name: '''root''' and the router's admin password. You should then be able to '''ping''' the other router or any of the end devices that you have connected to either of the two routers. To execute a ping command, type '''ping <devices_ip>''' into the console and press the Enter key:
[[File:Networking rutxxx configuration example cli ping v1.png|border|center|class=tlt-border|700x300px]]
[[File:Networking rutos relay configuration pinging example v1.png]]
Replace <devices_ip> with an actual IP address of a device that is in your network and if the ping requests are successful, it means the configuration is working. You can check the IP addresses of the devices connected to your network in RUT1's '''Status → Network → LAN''' section.
Replace <devices_ip> with an actual IP address of a device that is in your network and if the ping requests are successful it means the configuration is working. You can check the IP addresses of the devices connected to your network in RUT1's '''Status → Routes''' section.
==Additional notes==
==Additional notes==
