Changes

====Hotspot VLAN interface configuration====

====Hotspot VLAN interface configuration====

Now that we have established the management VLAN interface, we can proceed to configure the hotspot VLAN interface. To do this, as before, please navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write hotspot or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

Now that we have established the management VLAN interface, we can proceed to configure the hotspot VLAN interface. To do this, as before, please navigate on router WebUI to '''Network -> LAN'''. While there, add new interface. To do this, simply just write hotspot or any other name that you prefer for this interface and press add.  In pop-up window you need to do the following steps :  

 

# Enable the interface

<li>Enable the interface</li>

# Enter interface name as "Hotspot"

<li>Enter interface name as "Hotspot"</li>

# Protocol should be set as "None"

<li>Protocol should be set as "None"</li>

[[File:Hotspot_4_lan.png|border|class=tlt-border]]

[[File:Hotspot_4_lan.png|border|class=tlt-border]]

# Next, In physical settings turn on "Bridge Interfaces"

<li>Next, In physical settings turn on "Bridge Interfaces"</li>

# Additionally select eth0.50 interface

<li>Additionally select eth0.50 interface</li>

[[File:Hotspot_5_lan.png|border|class=tlt-border]]

[[File:Hotspot_5_lan.png|border|class=tlt-border]]

#Lastly, In firewall settings, choose LAN zone

<li>Lastly, In firewall settings, choose LAN zone</li>

[[File:Hotspot_6_lan.png|border|class=tlt-border]]

[[File:Hotspot_6_lan.png|border|class=tlt-border]]

# Dont forget to press Save & Apply

<li>Dont forget to press Save & Apply</li>

===Router Hotspot configuration===

===Router Hotspot configuration===