Changes

# Access router‘s WebUI. Navigate to '''Network''' → '''LAN'''.  

# Access router‘s WebUI. Navigate to '''Network''' → '''LAN'''.  

# Click [[File:Pencil2.png]] icon on the right of the LAN interface.

# Click [[File:Pencil2.png]] icon on the right of the LAN interface.

# If necessary, select Protocol in the General settings tab as Static.  

# In opened LAN Interface window select Protocol: '''Static'''

# Enter IPv4 address, as well as subnet mask.

# Enter IPv4 address: '''192.168.1.2'''

# Enable DHCP. Based on your requirements, edit DHCP limit and lease time or leave the rest of the settings as set by default.

# Enter IPv4 netmask: '''255.255.255.0'''

# Enable DHCPv4: '''on'''

[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]   

[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]   

[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_2_v2.png|border|class=tlt-border]]  

[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_2_v2.png|border|class=tlt-border]]  

----

----

===Common settings===

===Common settings===

The following settings need to be applied to all of the routers in the wireless mesh network including mesh gateway and nodes.

The following settings need to be applied to all of the routers in the wireless mesh network including mesh gateway and nodes.