17
edits
Changes
Wireless Mesh configuration example (view source)
Revision as of 12:56, 14 August 2024
, Yesterday at 12:56→Common settings
[[File:Gateway_LAN_Configuration.png|border|700x500px|class=tlt-border|center]]
[[File:Gateway_LAN_Configuration.png|border|700x500px|class=tlt-border|center]]
----
----
----
===Common settings===
===Common settings===
The following settings need to be applied to all of the routers in the wireless mesh network including mesh gateway and nodes.
The following settings need to be applied to all of the routers in the wireless mesh network including mesh gateway and nodes.
Open router‘s '''WebUI''' and navigate to '''Network → Wireless → SSIDs''' click [[File:Pencil2.png]]on current available 2.4 Ghz Wireless interface configuration and make the following changes:
# Select Mode: '''Access Point'''
# Select Radios: '''2.4GHZ'''
# Enter SSID: '''MESH_DEMO'''
# Enter Password: '''Password'''
# Select Network: '''LAN'''
[[File:SSIDs General Settings_1.png|border|class=tlt-border|center]]
<ol>
<ol>
<li>Open router‘s WebUI and navigate to '''Network''' → '''Wireless'''.</li>
<li>Open router‘s WebUI and navigate to '''Network''' → '''Wireless'''.</li>
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_demo_common_configuration_8.JPG|border|class=tlt-border]]
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_demo_common_configuration_8.JPG|border|class=tlt-border]]
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_demo_common_configuration_9.JPG|border|class=tlt-border]]
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_demo_common_configuration_9.JPG|border|class=tlt-border]]
===Mesh nodes===
===Mesh nodes===
